Recent content by danish6259

I've had the same thing happen on my 500 four. I cleaned up the timing to the best of my ability and that got rid of it almost completely but it still happens on a rare occasion. I'd say check that first but hopefully someone with a little more knowledge can chime in on this one.

Well, whatever was causing the problem is now gone. Blew out all the ports with some compressed air and the fuel lines. Reassembled everything and hooked it all back up, turned the fuel on and it flew down into the carbs and not a single bubble came back up. Started right up on the second kick...

That definitely isn't a problem. I glass bead blasted the entire carbs so they are as clean new. I'm tearing into them right now and will check all the porting and see if anything might be clogging them but so far everything looks to be clear.

Just pulled the tank off to double check and it flows like a champ even with the cap closed.

Having the tank cap open doesn't do anything for flow rate. I've even given the tank a small positive air pressure and it didn't help. I have a feeling it might be something internally with the cabs but I want to try and eliminate everything else before I split them open again.

Hey everyone. Just finished my latest re-re-rebuild on my cb500 Four and have come into a small problem. For some reason the fuel isn't flowing out of the tank and into the carbs at a steady pace. I constantly have air bubbles in the lines and the won't go away. The carbs have been completely...

Dude, amazing work!!!!!!!! It looks like a completely different bike. What else do you have planned for it?

Thanks for all the encouragement everyone!!!!!! It really means a lot to me and is going to keep me going on this project along with keeping the quality of the work as high as possible for me. :D Fun Jimmy - I checked out those gaskets but I couldn't really find anything for my engine with...

It's been a while since I last updated this so it's about time I do. I've been getting a good amount of work done and got some paint laid in the last week or so and it's turning out pretty good. Now I just need a new name for this project seeing as I'm finally getting somewhere on it...

Re: Project "Indecisive" '72 CB500 Four Woods - I haven't looked yet but I don't see why I couldn't find the rings and everything for the pistons to replace them just in case. If anyone knows a reliable source to get these parts at let me know. I picked up a cylinder hone and did the work...

Re: The Poor Boy - A Tale Of A CB550 Lookin good!! Also, I forgot to ask before, what color/brand paint did you use for your engine? I really like the look of that matte silver.

Re: The Poor Boy - A Tale Of A CB550 That's an amazing paint job you did on the engine. I'm a little jealous. Also, I spy a soda blaster from Harbor Freight. :D Excellent build so far. Keep up the awesome work!!!

Awesome little bike and it looks to be in amazing condition. Can't wait to see the progress on this!

Re: Project "Indecisive" '72 CB500 Four After checking out the pistons again I found all 4 are stamped with Honda on one side and the other side had some numbers. First set is stamped with 323 and 7 or 1? It's a little hard to tell Second set has 323 4 and 323 2 Any idea as to what these...