Recent content by Krappy

Can anyone point me to the right cam chain master link for a 71 cb175. I was under the impression that I am looking for a 219h, but when I saw the one on DCC, it looks different than the OEM one.

Can anyone confirm that this is the correct Time-sert kit I need for a '71 CL175? I have 12mm x 1.5 (pitch) for the thread dimensions. Is the 9.2mm insert long enough? http://www.amazon.com/TIME-SERT-Metric-Kit-Part-1215/dp/B001JK44D4...

Can anyone verify the spoke "nut" size for a 71 CL175? I'm on fleabay and a few other sites looking to pick up a spoke wrench.

Definitely agree, they look to be supporting the under side of the valve springs, which on the exhaust side is the only thing between the head and the springs whereas on the intake side the valve seat (#15) appears to do the same job.

On the '71 CL175s are the washer-like valve seals only on the exhaust side? I'm reassembling the head and I thought I was missing a set until I looked at Bike Bandit's parts diagram. Can anyone confirm this? Parts #17 & 16...

Re: My CB200 BUILD - THE RESURRECTION - SHOW N SHINE PHASE I thought you parted this bike? ???

Thanks guys! On a side note the ebay seller I bought the rings from is sending out a new set free of charge!

Just snapped a new ring :'( and wanted to see if anyone could recommend a somewhat low priced expander that would work on CB175 piston rings. Would something like this work...

Re: '71 CL175 - Stretched tank preview Let me know if you still need the side sprocket, I have an extra one laying around. Also, which fender are you looking for I have 2 front and 2 rear CL175 ('71 K5) fenders in pretty good shape.

I bought these ones for my 71 CL175 and they worked out great. http://www.ebay.com/itm/300770776947?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 If you need individual specs you could probably check out Bike Bandit or Western Hills Honda.