Valve seals on CB/CL 175

[Krappy]

On the '71 CL175s are the washer-like valve seals only on the exhaust side? I'm reassembling the head and I thought I was missing a set until I looked at Bike Bandit's parts diagram. Can anyone confirm this?

Parts #17 & 16
http://www.bikebandit.com/houseofmotorcycles/1971-honda-scrambler-175-cl175k5/o/m151887#sch394623

 

[teddpage]

Those dont look like valve seals...it almost looks like a washer and is supposed to say valve spring SEAT. The actual valve seal looks to be part 9 and 10 in that diagram...

I cant say for sure, hopefully someone with cb175 experience will chime in shortly.

 

[Krappy]

Definitely agree, they look to be supporting the under side of the valve springs, which on the exhaust side is the only thing between the head and the springs whereas on the intake side the valve seat (#15) appears to do the same job.