Recent content by nukem1r

when i was doing this...i tried a few times. got frustrated almost called it and paid the money for someone else to do it...then i found this link http://www.easterndirt.com/?p=385 very good write up when combined with all the lacing instructions on the forums... I knows its dirtbike but its...

Process Tech(engineering) in photo-lithography at a major microchip manufacturing plant, basically I fix problems in our manufacturing line in my Dept.

Re: sr 250 cafe - rachel a trick to clean frames of old paint and powder...a propane powered weed burner...it will burn all the paint off and then you just brush it clean..... Mike

you can also hold the expansion piece with some pliers and a rag(loosly so you dont bend it as it expands) prior to putting the mirror in and turn the screw till it expands enough to be a tight press into the bars...then the expansion piece will catch the inside of your bars and start to tighten...

Last time I measured mine I believe the od was 1.5 inches

PS...ill get some better pics of it up this afternoon :)

So after countless hours trying to get my 350 to run the camshaft broke. so I rebuilt the top end of the motor and now it starts on the first kick :) I think something in the motor was binding it used to be really hard to kick over(previous owner of motor had probably rebuilt it wrong) It kind...

Not sure it must had a weak spot because it was when I was kicking it over. All of a sudden it got way easier to kick and made the wonderful metal on metal clicking sound. Luckily it didn't chunk off. Got the motor all back together. Putting it back in on Monday and hoping I can get it to fire!!

still have these available? Mike

sweet good idea! thanks

Im about to put my CB350 top end back together on sunday (camshaft broke in half!!) so i decided to replace my pistons and rings.. does anyone know a trick to compressing the piston rings without having to get 2 of the tools? Thanks, Mike

i think the diagram for the taillight is actually correct.. it would be a dual stage bulb... 1 lead for the lights on and the second lead for the brake light...just not labeled correctly..

i was fixing my quad one day and realized that the splines matched...it didnt have the bend in it like the stock 350 shift arm just flat...used ebay and got another for like 5 bucks... cut it rounded it and powdered it..good as new! lol