Recent content by rothko78

Stator was dead. Put a new one in and it charges perfectly.

Should the stator have oil in the housing?

I think the issue is the stator. Only get readings sporadically. Have taken it out and going to get it rewound.

Hey Sonreir I am still having charging issues. As in it will not charge. Any suggestions? Done everything you recommend above.

ok so everything more or less works, seem to be having a few hiccups though still. Only wants to charge intermittently. Thinking the stator may not be putting out the correct voltage. Does anyone know what voltage each wire from the stator should be putting out?

Thanks. Will give that a try and see what happens. Stay tuned.

Thanks Sonreir. Got most of that done. Does the brown wire also have to join to the black wire? Can't work out where that needs to connect too. My bike only has a rectifier not a regulator. At the headlight end should the yellow and white also connect to the wires that go to the original...

here is the switch block wiring key

Well after two months of tinkering i realised i can't sort this wiring out on my own. I have changed to a new switch block from the originals. Attached is the wiring key for the new switch. It seems this has less wires than the original switches. There is no where to connect the Yellow and...

Hi guys Can anyone help me out with some wiring questions? Changing to a new switch block with al functions in one. But am confused about some of the wiring that went to the original switch blocks.... ON the attached writing diagram can some one explain to me what the following are on the...

So been stuffing around with some small bits and pieces nothing to interesting. Hope to have wiring finished this week. Got the rearsets properly mounted. One bad thing though is the engine is leaking oil. So need to get that sorted before I start it up. Here are some pics.

Coyote13 got the rear sets fitted up and the kicker just clears the toe piece when it is on the furthest back mount. Going to try a cb360 kicker to see if I get more clearance with the toe piece further forward. Fitted a few new parts tonight.

thanks mate. I am really happy with how its turned out. Does anyone know what ratio the speedo is on a CB100?

It's going to be pretty close. But still working on the rear sets so not sure yet.