Recent content by Snejkaj

Impressive! I've been planning a KTM-powered Cafe racer for years. Maby time so source parts:) Skickat från min Mi 9T Pro via Tapatalk

Quite happy with the result. Working on some padding and rivets for the back part to make it look nice. Skickat från min iPhone med Tapatalk

Really like red Seat padding starting to get some shape. Will be covered with black fake leather for starters. Skickat från min iPhone med Tapatalk

Some prep work before paint. Soon it will be red with black Leather seat. Step by step towards a ”CR” 650 [emoji4][emoji965] Skickat från min iPhone med Tapatalk

Long winter... not much done[emoji16] After some commuting to work I had to do something. Moved the electronics and started to fit a CR750 seat. I’ll place the battery under the swingarm. So next week I’ll fabricate at box. Skickat från min iPhone med Tapatalk

My CB650 -80 Before After Sent from my iPhone with Tapatalk

Think this is will be one of the last rides this year.. a bit cold riding in 9 degrees (celsius), and it aint gonna be warmer until april.. So it’s soon time to sand the tank and paint it. A new seat is also high on the to do list.. Sent from my iPhone with Tapatalk

Re: Engine "coughing" at low revs How is your fuel filter? Have you changed air filter and/or exhaust? Sent from my iPhone with Tapatalk

My major problem is solved! It was a bad coil. Still have som issues. I think it runs a bit lean. When I pull the clutch for a gear shift with a hot engine the rpm increase and then comes down. Sent from my iPhone with Tapatalk

What software did you use to make the wiring diagram? Sent from my iPhone with Tapatalk

I'm in! 8)

Will check tank vents, but I think I have another odd thing. When I start it cold at full choke it has very low revs. If I push the choke in a bit it revs up alot. Push it in some more and I get more of an idle. This weekend I'll measure float level and check float level with the clear tube method.

Forgot one thing. It does not help to twist to full throttle when it starts to run crappy.

I've gotten some problems with my cb650. Specs are: Dyna S ignition OEM coils with extra resistor Pod filters 120 main jet 42 pilot jet Mixture screw 1.75 turns out My problem started with a clogged fuel filter. Changed to a new one. Then I drove the bike about one tank of fuel. Then i leaned...