Recent content by SupportThe Second

My neighbor on his 750 restoration had the same issue. It ended up being the valve that is attached to each float in each carb wasn't closing completely and prevented starting. He gently cleaned each orifice with a small dental tool and that did the trick. On his though as well he was getting...

Yes it is Brad. 1974

Like everyone else it seems in the known Universe I would like to replace my faded right side cover. If not I guess I am going to go the auto body painter route and try to get it color matched as much as possible. Thanks!!

Thats a good idea are there any one specific one that is recommended?

Ok big update here. Been riding it after having all the fluids changed, carb bowls put back on the right carbs (they were reversed and the choke was not working because of this) and an overall timing tune up new plugs etc. Since I have bought it I have put just 100 miles on it and today after...

I think I am going to have to dive in a look since I really hope that's what it is. It feels like jetting to me but I haven't owned one since the late 70's.

A little history, just recently purchased a couple of weeks back, it has had the following done to it last week: Compression is 140 in each cylinder. Timing and a general overall tune up done including oil pump adjustment, carb sync, carb jets checked and cleaned (Mechanic said he thought the...

Thank you to everyone, I think I may try the chemical route with the stripper. too bad it didn't come with a pole.

Searched for some suggestions but didn't see any. 74 RD350, I have looked into clear coat removers, and wet sanding to remove the clear coat off the front forks and buff out the aluminum, have had some luck with a dremel and a drill with a buffing pad and compound but it's been slow going that...

Thanks for the replies all. I was told the crank seals were done about 500 miles ago along with the one over weisco rebuild. Hopefully that much is good to go. Major service being done on next Monday along with a safety inspection.

I guess I am concerned that the oil injection failure on an older 74 RD350 . Do most people just keep the autolube or do most people go the premix route in the tank and if so is it that big of a deal to accomplish. On a bike this old it just makes me nervous that if the pump fails a seizure is...