Recent content by tommycreeper

  1. tommycreeper

    New Project, New Problems. 79 CB750K

    Here is what I've noticed so far(keep in mind I've only spent a few minutes here and there with the bike). I have been messing with the old throttle cable to see what I can find. When placeing the cable back on the throttle opens up. This is a problem, right? Stupid question I know but I have...
  2. tommycreeper

    New Project, New Problems. 79 CB750K

    After fixing up a 73 cb350g, I thought it was time to move up to the big leagues and get a 750. Man, this is going to be intense. I pick this bike up from a friend this weekend, he had trouble with the idle and was sick of messing with it. Here is the first issue I am dealing with: the bike...
  3. tommycreeper

    cb350 carb help, warning newbie content

    It actually doesn't have a seal on it. I have one ordered.
  4. tommycreeper

    cb350 carb help, warning newbie content

    Jesus!!! Ok well, I did that and the screw looked fine. I put it back in and it started working properly. So I went and adjusted everything on the carb. I got the idle perfect(about 1200). I took it for a spin and it was running GREAT even better than when I bought it. After about 15...
  5. tommycreeper

    cb350 carb help, warning newbie content

    I noticed that adjusting the pilot screw on one of the carbs doesn't make a difference. That seems like a problem. How do I fix that?
  6. tommycreeper

    cb350 carb help, warning newbie content

    Rich, thank you for all the advice. I started messing with it more today. I started it and let it idle for a while and while still in neutral I revved it up and the RPMs stayed high, around 5000. Then the right carb quit working. I had this problem with it not working before. Someone...
  7. tommycreeper

    cb350 carb help, warning newbie content

    1. This makes sense. When I go the engine revs but I move at a slow speed almost like the clutch is still half engaged. Do I start with adjusting the cable? What is the proper way to do that? Also, what oil should I use? Thanks for the info!
  8. tommycreeper

    cb350 carb help, warning newbie content

    I want to start off by saying this forum is great, I am learning so much already. I have a 73 cb350 with 722a carbs. I have been having trouble getting them to work properly. At first it was bogging down at low RPM then taking off. I went through and cleaned everything. Now it is harder to...
  9. tommycreeper

    Greetings from Evansville, IN

    Here's a pic
  10. tommycreeper

    Greetings from Evansville, IN

    Hi! I just got this beauty a few weeks ago. It's a 1973 CB350G, it needs some work but I fell in love at first sight. I have lurked on the board for a while and it seems to have some great people on here. I am a newbie so please be prepared but not annoyed by all of my stupid questions...
Back
Top Bottom