Search results

I have replaced the points and gapped and set the timing correctly. I tore down the carbs and the diaphragms are both good, the float pin on the left carb is missing the little wire clip and the float pin was sticking, so I replaced it with another pin and it started to move more smoothly...

Do you have a seat?

Thanks a ton for the responses... It appears to be running on one cylinder, the right. Check my work... I think that only one cylinder is firing. the plug looks brand new and the one on the right looks normal, not lean or rich. After running for a few minutes the right header is hot and the...

I just picked up a CJ360T today and it starts like a champ, however when I ride it the throttle gets it rolling and when I roll on it it responds so slowly!!! I am sure that this is one of the questions that have been asked again and again, but if anyone could give me a check list to start...

This looks like what was there! All I need now is the oil radiator... That will probably cost an arm and a leg http://xs500.proboards.com/index.cgi?board=shareyourcustommods&action=display&thread=361

Yeah, I am pretty sure there was an oil cooler at one time. It didn't come with the bike though...

I am not sure what year head it is... I have the original 2 piece and it has several cracks between the valves. This weekend I will be checking the valve gaps, put on new gasket and cover. Remount the engine in the frame and check the compression. What else should I test/check to get a...

Came with a newer set of points that I will use to replace these

This seat is not stock, but mounts perfectly. It weighs about 20lbs.

Pulled the cam cover and it looks like it has already been rebuilt Super clean

Other Side

I picked this '74 TX500A for $120 off Craigslist. I pulled the motor and am in the process of stripping it down to clean up the frame. With the tank and super heavy seat! Dismounted engine

Do you still have any parts available? I am not local, but would like to get the following for my 74 TX500A: Headlight assembly Points Cover Sprocket cover Left side driver peg Pipes