100LL AVGAS in 70s era motorcycles

manas

Been Around the Block
This is more out of curiosity than anything else : as a pilot I've actually noticed that during racing season people show up at the airport to buy 100LL aviation fuel for their old muscle cars. I've also talked to some aircraft mechanics who've testified that they've used it on modern dirt bikes as well. The only form of caution I've received is running it in fuel injected models, which sounds like common sense to me.

Modern engines don't perform any better with higher octane fuels as I understand it. Do older, carbureted engines act differently? Furthermore, MOGAS in the 70s contained lead so I assume using a fuel with lead in it such as AVGAS would cause no harm, and if anything the engine should perform closer to the specs that it was designed for originally (when car gas contained lead)

Thoughts? I'm not about to use any myself, but interested in anyone's thoughts about it..
 
You should always use the lowest SAFE octane you can get away with.So the higher the cylinder head pressures[all other variables staying the same] then the higher octane required.It doesn't matter weather the pressure is increased from turbo,supercharger,advanced timing,compression ratio.My fuel injected Kaw actually makes less power[proven on a dyno] and runs 2/10 second slower at the drags if I switch from 87 octane to 91.
 
100LL has a lot of lead in it. The blue stuff has a couple grams per gallon of tetraethyllead. I believe it is a lot more than automotive fuel ever had. I would expect lead deposits after continued use and maybe fouled plugs. I think it will destroy a catalytic converter. I really don't think it will hurt anything to run it in an old bike.
 
Re: Re: 100LL AVGAS in 70s era motorcycles

jetmechmarty said:
100LL has a lot of lead in it. The blue stuff has a couple grams per gallon of tetraethyllead. I believe it is a lot more than automotive fuel ever had. I would expect lead deposits after continued use and maybe fouled plugs. I think it will destroy a catalytic converter. I really don't think it will hurt anything to run it in an old bike.

That makes sense to me. I wonder why these guys put it in their cars though. Perhaps just not fully aware that it doesnt offer a performance gain? Hmm.


jimmer said:
You should always use the lowest SAFE octane you can get away with.So the higher the cylinder head pressures[all other variables staying the same] then the higher octane required.It doesn't matter weather the pressure is increased from turbo,supercharger,advanced timing,compression ratio.My fuel injected Kaw actually makes less power[proven on a dyno] and runs 2/10 second slower at the drags if I switch from 87 octane to 91.

Sent from my Galaxy Nexus using Tapatalk 2
 
With higher octane fuel you can run higher compression. Higher octane is more resistant to detonation (harder to light) so you can run big compression numbers.
Raising compression is an easy way to gain power, but you need increased octane to run it. 100LL is 100 octane and is significantly higher than 91.
 
jimmer is spot on....using more octane than the engine needs is a waste of h.p. and money, in a nut shell the high octane fuel burns slower in your stock engine. av gas is blended for engines that run at altitude and constant low rpm. if you have no detonation stick to lower octane fuel.
 
Joea is right on too.

It seems people associate high performance, high compression engines with high octane gas. So there is a belief if I put high octane gas in my vehicle, it will perform better. Some have said it is cleaner, has better detergents and additives. the fact is, all grades have pretty much the same level of detergents and the like. The oil companies like you buying the more expensive brand when you don't need to...That's marketing for you...
 
Re: Re: 100LL AVGAS in 70s era motorcycles

mydlyfkryzis said:
Joea is right on too.

It seems people associate high performance, high compression engines with high octane gas. So there is a belief if I put high octane gas in my vehicle, it will perform better. Some have said it is cleaner, has better detergents and additives. the fact is, all grades have pretty much the same level of detergents and the like. The oil companies like you buying the more expensive brand when you don't need to...That's marketing for you...

As u understand it, from my experience in aviation 100LL is unlikely to have any useful performance or cleaning additives. The reason is quite boring so bare with me : 100LL is already an outdated fuel. In fact, it costs more the JET A because refineries don't find much of a profit margin in making it. Aircraft that use it are primarily older aircraft that are now used for training and small mail run type applications such as Cessnas, Pipers and Beechcraft. Aircraft combustion engines were all carry over designs that proved reliable during WW2. As such additives were never really added to the fuel since such a wide variety of aircraft had to be supported.
 
Back
Top Bottom