1964 Benelli/Yamaha Hybrid Build.

flat_out_fury

New Member
I was in Stockton CA last week. I went to my friends grandmothers house to help move some crap out of the back yard, and then I spied a neat little motorbike rusting away along the fence covered in vines. Upon closer inspection, I noticed a nice boxy tank, and I thought to myself "That tank would look great on a cafe bike". As I tore more of the vines away from the bike, I found myself wanting to take the tank waining, and just wanting to take the whole bike.


Grandma was more than happy to see the bike get out of her garden, so I threw it into the back of the truck and took it to my friends house and stuck it in the garage.


Now for photo's and some more of the story.


P2100310.jpg

Here's what I brought home. Some research online told me it was a 1960's Benelli Fireball. A pretty rare bike that was sold through Montgomery Ward.


P2100312.jpg

I immediately took a sharpie to the side of the tank to get an idea of my paint scheme (black, yellow, and white).


P2100314.jpg

Within 20 minutes, I knew what I wanted to do. So my friend and I lifted it up onto the table, and I stripped everything off of it that I didn't want... except the tank, I totally kept that.


P2100317.jpg

Ahhhh... The next morning (we got pretty drunk while working on bikes) and this little mock up was waiting for me in the garage.


P2100319.jpg

This was just a nice photo... enjoy.


P2100323.jpg

To give you an idea of how small this motorcycle is, that's a 20" bmx tire on the front.


P2100324.jpg

Decided to try a mag wheel, not sure, I'm a big fan of spokes.


Benelli purists, close your eyes, and plug your ears.
I've cut out the old engine mount, and I'm going to install an engine from a Yamaha dt250 that I have wasting away in my back yard.


I'll take more pictures and update next time I go to Stockton (which is on Monday).
 
I was going to say if its rare, restore or sell parts and make some cash but now that you're chopping, keep chopping.

That's a cool little tank going on there. Looks like it'd be a small, flickable little scoot when you're done.
 
I like this build. I was recently introduced to the Ward's Riverside/Benelli line. I ran into this one a few months ago touring the property of a friend. It was intriguing, and I went back to photograph it. Doesn't seem to be a huge market for them, but they are rare.
 

Attachments

  • Barn Find LR copy.jpg
    Barn Find LR copy.jpg
    74.5 KB · Views: 405
Okay, here's something a little off topic: Now, I've always loved Cafe bikes (even before I knew what they were called) and used to dream of riding my neighbors vintage Ducati when I was in 6th grade, and i thought my first Cafe build was a Yamaha I did last year... Well, it turns out, my first Cafe build was in 2004... sort of.

So, I went out to the parts shed to find some exhaust bits for my friends KZ project, and came across this little treasure...

P2210359.jpg

This is a Gravity Bike, it's a bicycle designed exclusively for going down hills irresponsibly fast.

P2210360.jpg

It has all the spirit of a Cafe Racer: I took a stock bmx, then I modified the holy hell out of it in order to make it faster.

P2210361.jpg

Look at that seat, it's just a cut up skateboard and some foam.

P2210363.jpg

This thing was incredibly fast (I got pulled over doing 63 mph in a 35 zone... and that wasn't the fastest it's gone). It used to have a fairing, but as you can see by those VERY bent forks, I crashed it... at fairly high speed (the brakes failed, so I looked for a soft spot to stick it, unfortunately there was a fairly large boulder hiding in the bushes).

Just thought I'd share this interesting little bit of my torrid love affair with speed.
 
Cut that sucker out of there (I need the mounts and such) Now I'm off to Stockton to stick this in a bike that was definitely not designed to hold it... Damn, that Benelli is going to be so F***ing Dangerous! I can't wait!

P2210368.jpg
 
Spent the week working for other people, so I only had time to test fit the motor (don't worry, I have pictures of that). Hopefully, next week I'll be able to start lengthening the frame and weld in the new engine mounts.
 
Hey Flat out, how on earth did that bicycle work? The bottom bracket where the pedals go is up where the seat should be....Got any pictures from back in the day when it was ridden?
 
teazer said:
Hey Flat out, how on earth did that bicycle work? The bottom bracket where the pedals go is up where the seat should be....Got any pictures from back in the day when it was ridden?

The bike isn't supposed to have any pedals. The frame is inverted to put more of a rake on the forks for better handling, and to bring the whole bike a little closer to the ground. When I was riding that bike (of which I have no pictures) it had a partial 1970's Kawasaki racing fairing, and about 80 lbs. of weight slung up underneath it to help lower the center of gravity and to make it harder to scrub off speed through the corners.

I'll build a new one, just so you know what I'm talking about.
And I'll start a new thread to go with it. I think I can get away with calling it a cafe bike, it has all of the spirit, just none of the motor.
 
I wouldn't use bmx rims if I were you. Sure they're sturdy at low speeds, but when you start going faster, you need something better. I would look around on the web and get something off a moped. You can actually buy tires with speed ratings for them (my moped's tires are rated to 112mph).


Maybe try something like this:
hobbit-mag-wheel-front-white-2-2.jpg

They even have drum brakes! Score! If you're interested, I can send you the site I used to buy this kind of stuff from when I was building mopeds.


It would look cool and be safe. I'd hate to see you dump the bike from a blowout or a bearing failure.
 
Oh, and apparently I forgot to comment on how awesome this is.... not sure how that happened. With a little bit of work, this could turn into a screamer. I love the shape of the tank. Little bikes like this don't show up much on sites like this, but I think they're way more special than a cb350 (sorry for all those guys I just ticked off ;) ). It doesn't look like something in shape to be restored to factory condition, but it looks like something that could turn out to be even better.


If it were mine, I would upgrade to a 32mm flatslide, do a little porting (mainly just clean stuff up and widen the ports to 67% of the bore. Maybe raise the exhaust port a tad.) and, have a custom chamber welded up. Then I would brace the frame up and try making a full race fairing (I would probably fail miserably at that).


A little side note on the rims too: The reason I said you should upgrade rims is mainly so you can upgrade tires. I know from experience what it's like to blow out a bike tire at 55mph :o . Luckily it was the back one. Not fun.


Peace,
Eric
 
Okay, here's the pics for the engine fitting.


P2250373.jpg

HOLY CRAP! Honestly, I'm amazed it fit without having to lengthen the frame (which I'm going to do anyway)


P2250374.jpg

The exhaust is why I need to make the fame a little longer (2-3 inches at the most) so I can access the mounting hardware.


P2250375.jpg

That is going to be so dangerous... really, this is unadulterated craziness, and I can wait to try it out.
 
Erskine said:
Can't you plumb the exhaust underneath the frame?
This is full on frontal lobotomy. :0

The exhaust IS going under the frame, but I need to have access to the mounting hardware. So, I need to make the frame a little longer (nothing I haven't done before) and I have to make all new engine mounts... Just chill, it'll be awesome.
 
Back
Top Bottom