1970 SL350 "Dirty Coast Cafe Bike"

moso

New Member
Hello DTT! my name is Michael and this is my 1970 SL350 build thread!

I have been wanting to build a custom bike sense I got my hands on a salvage 01 Ninja 250. I restored the Ninja to road condition and am currently using it as my daily driver. The project was a blast and I got to learn a ton about bikes, I have always been interested in cars and have built a few, but never had much exposure to motorcycles until now and I must say I'm hooked! So when my friend started talking to me about a derelict 1972 cb350 it peaked my interest pretty quickly, shortly after hearing about this bike my friend Roy started talking about building a cafe bike and thus the ball was rolling.

It probably took 2 months before I was able to get hold on the owner of the CB, a friend-of-a-friend and not really a social guy he was kind of hard to tack down. Roy and I decided to head out there one Tuesday morning and have a look at it, with nothing really to go on and the price set at $100 we knew the bike would likely be rough and were unsure if it was even fit to rebuild. When we arrived the bike was no where to be seen and after a bit of bike chatting the guy lead us to a back yard shed which contained, not a 1972 CB350 but instead, a 1970 SL350! I was quietly shocked. Without question or discussion Roy slipped the guy cash, obtained the title, and we loaded the bike into the truck for the ride home.

I snapped these pictures when we stopped for gas.

184_zpsce041804.jpg


183_zps93ba7253.jpg


She sports 6k original miles, and looks to be all there except for some side covers. It has a ding or two on the exhaust, the front fender is in the bed of the truck but we are unsure if its the original. Currently our plan is to get the bike stripped down to the frame and start with detabing and stitch welding. We are looking into swapping out a cb550 front end and extending the rear swing about 3 inches. We will likely be changing the exhaust to clear rearsets, and the carbs to Mikuni's. As well as changing the Tank for something larger and the Seat for something more race inspired. Of course all help and pointers are very appreciated. Currently I am having trouble deciding what to do about the chain and sprockets, for a more road ready bike.
 
We have spent the last few days striping down the bike, visiting junkyards, and buying parts! So far everything is looking very good. The motor shows great compression, over150psi and withing 3psi of each other. The frame is in great shape, as well as the swing arm. We sourced a mostly complete cb550 front end and a set of cb450 triples, we plan to use the 450 triples with the 550 forks, hub, and rotor, most likely laced to a 18"hoop for the front. No decisions have been made about the rear setup yet. For a tank Roy spotted a 66ish c90, fresh tank with no rust!! It came complete with the side covers and rubber pads, the only thing missing was the stock honda emblems so we will be on the look out for them.

I tore down the stock carbs and threw them in the ultrasonic cleaner, 29years of old gas is pretty much like glue. I ordered a set of diaphragms from a company in Ohio, they were mad cheap so I will post back how well they work. I also ordered a set of carb rebuild kits but im still not sure if I have all the correct parts to rebuild them as I cant seem to figure out what the stock size jets are. If anyone can tell me the stock jet sizes and if the Keihin pilot jet is the N424-22 style that would be awesome. I could also use a needle jet and have no clue as to the size or if the rebuild kit will come with them. Both the pilot jet and the needle jet are either pressed in or ceased in and I fear I will destroy them removing them.

And now for some more photos!


Here she is in here current state of dis-assembly, the motor and suspension will be taken off my next day out and the frame will be welded and detabed
002_zps1c626638.jpg


Heres that tank Roy likes, I think its super sick. We just need to have it modified wider the rear to clear the frame and move the petcock toward the rear.
003_zpse6ad955a.jpg


The carbs, prior to cleaning (obviously)
008_zpsc06d4924.jpg


And after about an 1.5hrs in the ultrasonic cleaner
011_zps13340df9.jpg
 
How the buid going i was interested in it. I have a sl as well about to start working on
 
To be honest its currently hanging around the shop. like from the walls and rafters! I have a whole section of shelving that is full of boxes of new, used, and somewhat newishly used parts. As well as the pile of towel wrapped polished aluminum parts, thanks to Roy.

I work in the service industry here in New Orleans so summers tend to be slow, and as the summer has slowed my income so has my projects slowed to a crawl. I plan on breaking this back out as the summer cools off and it becomes more bearable to be inside my storage unit/work shop. As soon as I get some time I will snap some photos of where it sits now.
 
Ok cool. Just courious whats your plans with the seat are you keeping it stock, custom seat or choping up the frame. I have a sl350 K2 so my seat options to buy a cafe seat are slim i would have to do some frame work to it that im not sure i want to do. I was thinking about buying a cb frame and build that since the K2's are the rarest of the 350's
 
We did decide to go with a cafe seat and in doing so were going to have to cut the frame. For me its not a big deal, we decided long ago to remove all the extra frame tabs and remove the factory mud guard. Im sure there are people out there that are cringing while they read that but the truth is, I dont much care about what other people think when it comes to the look of my cafe bike. I have a picture in my head and it just aint going away!
 
Moso I'm about 50 miles south of New Orleans. Redbird and Smajure live in the area also. That's a sweet SL, they usually go for a pretty penny. Good luck.
 
Back
Top Bottom