1971 cl450k4 build ಠ_ಠ

hello. just registered. first post. i'm doing a cl450 build, and decided to make my build thread here. just registered at hondatwins.net too, but more for specific honda info and help. i'm in northern california (east bay). my intention is to upgrade/replace everything that's old with modern or rebuildable/serviceable parts, so i won't have to worry about where i'm going to source any hard-to-find pieces in the future. i'll get pictures as soon as i can, but here is a rundown of what i have so far, and the types of things i plan on doing.

i bought a running 1971 honda cl450k4 in amazing condition. it had problems (smoking, bad shifting) but the parts are all in impressive shape. even all of the rubber looks and feels soft and new. stripped it down. basically just keeping the frame and engine. everything else is for sale.

forks
the first thing im doing is replacing the fork. i really liked that the cl has external fork springs compared to the cb, but finding compatible radial mount fork bottoms or complete 35mm radial mount forks wasn't working out well. so i did some research and found a more modern alternative; a 2005/2006 cbr600rr fork, complete (upper/lower triples, forks, axle, calipers, bars, controls, brake master cylinder). i bought conversion bearings for the steering head and am going to mount to fork next weekend.

brakes
i'm using the stock tokico calipers up front, and am going to try to mount a cbr600rr rear caliper to the cl450 rear axle/swingarm. i'm worried that the rear is going to be harder than i'm prepared for it to be, but by the look of it it doesn't look very complex.

wheels
i plan on figuring this out this week. my plan at the moment is to get wire wheels built, but i'm not sure exactly how or where. all i know is that i don't want to do it myself. i did some research, and this looks like the type of thing i would hate to do myself. i don't know much about wheel building, but i assume i am going to have to worry about getting a hub that fits the cbr axle, spaces the rotors where the cbr calipers expect them to be, and spaces the wheel center with the frame. i believe the cbr uses a 3.5x17 rim in the front, and the cl450 uses 3.25x18 or 19. i can't remember the cbr axle diameter right now, but i want to say it's 22mm. for the rear, i have to get a hub that centers the wheel with the frame, yet preserves the left sprocket alignment, and has space for a right side disc rotor and the rear caliper mount. i believe the stock cl450 rear wheel is 3.5x18, with a 20mm axle (25mm for just a little bit of the far left end i believe, for some reason). im not sure what wheel sizes to go with either.

rear shocks
i have the original right now, and they're in decent condition. but i plan on replacing them. i did source a pair of nos works performance first generation pro racers off of ebay, but the seller was brain dead derptard and due bad to my experience, i just shipped them back yesterday for a full refund...
i want to do something special for the shocks; i don't just wan't a pair of hagons or redwings. i'm just not sure what to do. ohlins seems like overkill. ill get bronze bushings for the swingarm too.

tank/seat
i was originally going to go with a cr tank (http://goo.gl/dFz8Y). after getting some advice, i was told that they're meant for only one race and dent easily due to their shape. i was given a suggestion to go with this type of tank (http://goo.gl/1cnwB) but the shape doesn't do it for me. as of now it looks like im going to go with a bcr carbon manx tank (http://goo.gl/5Wqa7). i'll probably get a bcr seat to match (http://goo.gl/1ZObj) or do something novel when i get to that step.

engine/trans
i have big plans for this engine. nothing is set in stone yet, but these are the types of parts i'm considering:
- dry clutch (http://goo.gl/GqKS3)
- close ratio 6 speed (http://goo.gl/jlExQ)
- 74mm forged pistons w/ nakasil coated sleeve (http://goo.gl/u34NA)
- street cams (http://goo.gl/vUzNu)
- 5mm valve spring conversion (http://goo.gl/cPGbi)
- external oil cooler (http://goo.gl/KRptv)
- electronic ignition, possibly boretech (http://goo.gl/xZ17g), would need new coils, not sure what

exhaust
still undecided. either straight pipes or some sort of custom exhaust, high pipes (http://goo.gl/1oW1u), or bcr 2 into 1 (http://goo.gl/neGmB).

this is the type of direction i'm trying to take. it's going to take months, so i'm in no rush. would love the communities suggestions, advice, and opinions. thanks for your time.



post script: if money was not an issue, i'd get ohlins sbk forks, fab a custom swingarm and go with an ohlins rear monoshock, full brembos all around, and go balls out with the engine and send it to franco cappellini in italy to get it fully built.



edit: here's a picture of the bike before i stripped it
9ZVzP.jpg
 
I may be wrong here, and am happy to stand corrected, but regarding the rear shocks ........

I would think splashing out on some modern rear shocks should figure pretty high on the shopping list, the rigidity and performance of the funky new front end putting greater demand on the rear end would highlight the limitations of their design. After all, the rear damping is the primary system on modern bikes and with the addition of modern tyre technology, wouldn't things start to go a bit pear shaped without a technologically balanced system?

I got ripped off recently over some shocks by a similar knobhead, and having paid to return them, can't even get the mealy mouthed low life cheating inbred scumbag to refund my money. So I feel for you on that one mate.
Been shafted a few times recently so now I'm only bidding on parts I can collect and verify before I hand over the readies.
 
Erskine said:
I may be wrong here, and am happy to stand corrected, but regarding the rear shocks ........

I would think splashing out on some modern rear shocks should figure pretty high on the shopping list, the rigidity and performance of the funky new front end putting greater demand on the rear end would highlight the limitations of their design. After all, the rear damping is the primary system on modern bikes and with the addition of modern tyre technology, wouldn't things start to go a bit pear shaped without a technologically balanced system?

I got ripped off recently over some shocks by a similar knobhead, and having paid to return them, can't even get the mealy mouthed low life cheating inbred scumbag to refund my money. So I feel for you on that one mate.
Been shafted a few times recently so now I'm only bidding on parts I can collect and verify before I hand over the readies.


Thanks for the advice. I'm searching for the right pair of rear shocks right now, as well as a wheelset.
I feel you too on the shocks. My story was the guy took pictures of a pair of "fully adjustable" copper shocks, then sent me this: http://i.imgur.com/Y1Xu9.jpg
He claims that they have preload, compression damping and rebound adjustments. I confirmed with Works Performance that they don't.
 
Back
Top Bottom