1973 CB350F - "Shakespeare"

SwissGuy

Been Around the Block
First bike, first build, but not my first time wrenching. I've been a Brit Roadster owner and aficionado since I bought my first car, a 1979 MG Midget. I'm 25 years old, but have never owned a vehicle made after 1980, and god-willing, it stays that way.

So, spent a year saving on my meager Army Retirement stipend to afford this project, and after a month of searching, mostly for CB360's, I went to look at one yesterday. Got there, and the guy who had advertised it had forgot to mention that the engine was locked up... So I of course left.

And then I got an E-mail from someone I had written off a week ago. He had a delightful green 1973 CB350F for sale, but never got back in touch with me... Within 10 seconds of reading the E-mail, I called him and told him that I'd take it, and within 10 minutes, had my GF's Uncle grab the truck, drive 90min with me up to Belchertown, and I paid the gentleman $800 for this lovely machine.


bike001.jpg


It's currently on my back porch, pending a tune-up tomorrow and a teardown, to be moved into my basement for the long dark winter, and begin its metamorphosis into a Cafe.

So, enough with the chatter, have some pictures.

bike003.jpg




bike008.jpg




bike010.jpg




bike011.jpg




It's not as pristine as the pictures look, the chrome is all pretty well shot, the tank is dent free, but has the clearcoat chipping away in spots, the bike idles on three cylinders, etc. etc. But all that shall be fixed in due time.

Anyway, you will be kept updated, it should be a quick build, limited only by funding. As I said before, I'm retired, so this is my project to keep me sane for the next three months.

Thanks in advance for the troubleshooting you are going to be helping me with!
 
I'll be swinging by too. 350F's are the nuts, with the 400/4 closely following.
I'd be wary of doing anything that wasn't reversible if it were mine, keeping to bolt on modifications and storing away the original stuff. But I think maybe these are not as rare in the States as they are in the UK.
 
Erskine said:
I'll be swinging by too. 350F's are the nuts, with the 400/4 closely following.
I'd be wary of doing anything that wasn't reversible if it were mine, keeping to bolt on modifications and storing away the original stuff. But I think maybe these are not as rare in the States as they are in the UK.

They are somewhat more rare than the 360s and 350 twins, but not exactly "rare". I don't plan on doing anything truly radical to it, don't even plan on repositioning the battery box and going for that "look through" look that seems to be popular.

That being said, it shall certianly be a Cafe.

Squadracorse (another user from here) is going to come over tomorrow and help me do a basic tune up (I being a neophyte to bikes). After that, going to sit down and make a plan of attack.
 
Have a 73 CB350F myself and I shall say it's a fun bike to ride, gets a lot of looks and questions about it. Good luck with the build, love that color on there!
 
I have a 79 midget too!

Cool little bike. I had one for a while.
Get it run and riding 100% before you tear it down....will help alot downte road...
 
surffly said:
I have a 79 midget too!

Cool little bike. I had one for a while.
Get it run and riding 100% before you tear it down....will help alot downte road...

'79 Midgets aren't the prettiest MG, nor is the 1500cc engine out of the spitfire the best, and it's certianly got the British Leyland quirks... But the suspension is much nicer than earlier models, and with a frame-mounted roll bar, some go fast mods, a set of minilite knock-offs, and a new exaust (the original chokes the hell out of the engine), they are the funnest thing on 4 wheels.

Money pits certianly, but damnit, great cars.

As to getting it running, that's the plan, get her 100% so I know what it should be like when I put her back together... I'm actually having second thoughts about caffing her out, saw a CL360 in rough but running shape for 300 that I may just pick up to molest, and leave this ol' girl stockish... decisions decisions...

I have to say, I go look out my back door every hour or so just to admire her.
 
If you plan on ditching the chrome tail light bracket, PM me. I've been looking for a good one for a while. Also, If you plan on doing ANYTHING to that tank, I have a dent free one that I'd trade+pay for it with a worse clear coat... Not a problem if you're going to paint it!

Nice score too! I love my 350F. More than my 350K! Soichiro's favorite bike!
 
BCBarker said:
If you plan on ditching the chrome tail light bracket, PM me. I've been looking for a good one for a while. Also, If you plan on doing ANYTHING to that tank, I have a dent free one that I'd trade+pay for it with a worse clear coat... Not a problem if you're going to paint it!

Nice score too! I love my 350F. More than my 350K! Soichiro's favorite bike!

I'll certianly keep you in mind, I'll send you a PM here in a couple of days. The tail-light bracket is on the short-list of things to modify... The tank I'm not quite sure about yet, but If I decide to paint it, I will gladly do a swap for one a little rougher.
 
surffly said:
I have a 79 midget too!

Oh, another thing about the Midget, I've got mine dyno'd at 99hp, i'll let you try and figure out what I did to it on your own. Muhahahaha

130mph in an MG Midget is scary as hell. I still hold the Presidio of Monterey record for the "Witching Hour Roadster Club" race from Monterey to San Luis Obispo. 3am, Start at the outskirts of Carmel, 90 miles to SLO on Highway 1 South, the prettiest road in the world.

Rules are, must be a drop-top, must be older than 1980, speeding tickets and accidents are on you.
 
After a few beers, a pack of smokes, a bit of help from Squadracorse, got the carbs off and disassembled and... they were great. Sparkplugs were coated in oil, so that may have been why I was only firing on three cylinders. We're going to blast the carbs tomorrow with compressed air at Squads new place, re-install the bank with the original jets, and I'm going to have to beg/borrow/steal a compression tester, carb syncer, and all that. So the running problems are a bit more complicated than just "carbs are dirty", but such is life.

So, pics:

Day 1!

bike013.jpg





bike018.jpg




Waiting until we have her running to decide how radical I want this build to be... But two things are definitely changing, those bars and those pipes. Going to see about fabbing up a new seat that uses the original mounts so I can still have the tool-compartment and easy access the the airbox/battery.

Decisions to be made:

4-1, 4-2, or 4-4 exhaust
Seat style
tail-light/indicators
Starter delete?
Rearsets
Clip-ons or clubmans or other.

But first, why are my spark plugs coated in oil. More on that later.
 
SwissGuy said:
Oh, another thing about the Midget, I've got mine dyno'd at 99hp, i'll let you try and figure out what I did to it on your own. Muhahahaha

130mph in an MG Midget is scary as hell. I still hold the Presidio of Monterey record for the "Witching Hour Roadster Club" race from Monterey to San Luis Obispo. 3am, Start at the outskirts of Carmel, 90 miles to SLO on Highway 1 South, the prettiest road in the world.

Rules are, must be a drop-top, must be older than 1980, speeding tickets and accidents are on you.

honestly I dont know much about making these go fast.
hope to learn more as she will be getting an overhaul this winter...
 
Today's Agenda:

Polish things. Oh lord my wrist. Dremel will have to wait until the first, hopefully that'll speed things up on the larger bits.

Also, a neat little trick for polishing rust from chrome, got this from a bicycle aficionado friend of mine.

Take Aluminum foil, cut into 4in squares, dip in water, or even better, Cola, and rub over the spot, work in 6in sections at a time. You'll notice you build up a blackish/brownish "paste" as you rub, this is Aluminum Oxide mixed with the rust (iron oxide) you're removing. It doesn't work by mechanical force like steel wool, it works by Chemistry! The Rust reacts to the aluminum and water, breaking down quickly, also producing Aluminum oxide, which is harder than steel, which further polishes the part.

I might be off on the chemistry bit, but I can tell you one thing, I have never seen a method that cleans up rust faster. Crumple up a piece of foil for getting in nooks and crannys, but otherwise you just glide the wet foil over the part until it is as smooth and rust free. Switch foil squares every so often. This works on chrome or steel, and will remove oxidation from alloy parts also, but will leave fine scratches in aluminum alloys.

Seriously, if you don't believe me, try it, it works so much faster than Steel-Wool and doesn't leave any fine scratches in Chrome or steel!
 
I have never heard of the foil tip but I love it! Keep up the work on your scoot.......should be a nice one!
 
Spent yesterday evening getting the Carbs blown out and put back together at Squadracorse's new speed-lab, he gave me a set of clubmans to get rid of the original high bars, and we discussed plans for our winter builds, should be a good time.

Decided to go 4-1 on the new exhaust, my question for you is does a 400F Exhaust bolt right up to a 350? I've heard yes, but going to the experts is always a good decision.

Keeping the tank stock, going to clean up the clearcoat a bit is all. Chopping the front fender, so if anyone is doing a restoration on a 350f and wants to swap my really clean front fender for a not-so-clean one, let me know, i'd rather hack on a beat up fender than a pristine one. Going to order my indicators from DCC here soon, drill out and run the wires for the clubmans,

Also on the chopping block is the rear-fender, the tail-light bracket has already been spoken for. I'll keep you all appraised as to what original parts I'm deleting or chopping up for anyone doing a restoration, it'd be a shame to see all that nice chrome get chopped and powder-coated.

Also, the Harley-esque mufflers on the bike are also on the chopping block, let me know if you want them.

All items are free for cost of shipping, but of course donations toward the build are accepted in exchange for a part, if you have something you want and I haven't listed it, let me know and I'll tell you what I'm doing with it.
 
Anyone have a trick for getting the Airbox back in the frame? I know this should be simple... But I've been trying it at every which way and angle and have not found a way to do it. Even unfastened the rear inner-fender for more clearance but no dice.

It's the little things that frustrate the hell out of you, took me an hour to re-connect the throttle cables because in a fit of idiocy, I was hooking them up in the wrong order, and this out of my mind frustrated when there didn't seem to be enough play to install both.
 
Okay, got everything re-installed, she fired right up as usual, but is only running on three cylinders. Pulled and cleaned the plugs of carbon to figure out what was going on, re-installed and fired up.

2-3-4 running rich, but I haven't done timing yet/tuning, so not exceedingly worried about that.

Plug 1 is covered in oil. Eeish.

Haven't done compression testing yet, but this mildly worries me, was hoping to not have to crack the case.
 
Tagging along for the ride. 'Tis a fun little bike!
Let us know what you determine on the oild fouling on #1... Head gasket perhaps?
I'd do a leak down test before splitting the case.
 
Plan of attack is to adjust tappets, adjust timing, adjust points, throw in new plugs, change the oil, add a touch of seafoam to the crankcase and tank, run it through, pray for deliverance.

If none of the above solve the issue, time for plan B.

Carbs are spotless in and out, assembled correctly, bench-synched, and getting fuel without leaking... so I'm confident in those.

A Short description of the issue:

Starts very quickly at half choke, revs climb instantly, drop choke to closed, idles at 800ish and then dies. With a touch of choke idles rough, cold header on 1, oil/fuel on plug 1, carbon on 2-3-4. Have not tested plug boots, have not tested compression, have not adjusted timing or clearances.
 
Back
Top Bottom