1978 XS Eleven build

GoRacers

New Member
Got bored with my Honda Shadow, traded straight up for this bike. I've been dying to build a cafe bike; this isn't the best bike to start with, but the price was right. ;D

Day I brought it home:
IMG_0238.jpg

IMG_0235.jpg


New tires, flushed the front brakes, wired up a new horn. All needed to pass inspection and register it.

Tore down the carbs because the bike loses a cylinder at constant rpm (freeway riding wasn't cool with only 3 cylinders functioning).

IMG_0256.jpg


Found a hole in cylinder 3's diaphragm, and worn spots on every diaphragm...
IMG_0249.jpg


Ordered the JBM diaphragms, hoping to put them on tonight.

Small progress last night. Put on the new grips and mirrors. Really happy with the look, especially for the price ($40 total, with shipping). Bike is BEGGING for round lights and gauges.

Before:
IMG_0263.jpg


After:
IMG_0265.jpg

IMG_0266.jpg


Hoping to get the carbs cleaned and put back together tonight, tuned tomorrow night.


I also have a build thread going at VwVortex.com:
http://forums.vwvortex.com/showthread.php?5790700-Traded-my-Honda-Shadow-for-this...

Comments/Criticism welcome. ;)
 
Nice bike, lots of potential. You can easily make minor changes and drop a bunch of weight. Good trade.
 
Welcome to the madness!
XS11.com is a treasure trove of info on these bikes.

I love my '78. It's been a fantastic bike.
 
I've been searching the hell out of XS11.com, tons of good info and knowledgable people there.

Really love the engine, hate the transmission. This bike definitely has the 2nd gear problem, can't really give it much throttle in 2nd or it slips out of gear. Hoping to limp it to the end of the season and then tear it down to remove/repair/replace first and second gears, clean and paint frame, go over the wiring, and clean/paint the tank.

Bike has a lot of issues, but I am having a blast so far tinkering in the garage again. ;D
 
Sounds great! If you're in Michigan let me know. I'd be glad to lend a hand.
 
What is the "best" way to deal with the 2nd gear issue? I was thinking of finding the best condition gears I can, modifying them with the dremel to get a better fit, then swapping them when I tear the bike down.

Got the bike back together last night. Started it up for peace of mind, then shut it off for the night. Sync/tune tonight, hopefully ride it tomorrow and/or Fri.
 
Thanks to the guys at XS11.com, got the engine stutter problem figured out. Two broken coil pickup wires. Soldering fixed the problem.

Then it came back, so I'm guessing one of my craptastic solder jobs failed. Didn't take it apart to investigate.

Rewiring the whole thing today with new wire to make sure it's fixed.
 
Check to make sure the advance mechanism moves freely, too. Mine had a broken pickup wire, but it also needed to be oiled. The bearing had collected 35 years of dust and was binding.
 
I do recommend buying a forkbrace. If you can't find one, tkat from xs11.com sells one for about $100 shipped that is great. It's what I run. It really tightens up the wobbly front end on these bikes.

http://tkat.com/forkbrace.html
 
replaced all four wires in the coil pickup system....no dice. Still runs like it has two cylinders down.

Pulled the plugs, they look like they may be fouled. I'm getting spark at every plug, but it is very weak. Throwing some new plugs in tomorrow to see if it snaps back to life....

Also need to tune it. It is a decent tune, but I can tell there is more power there to be had with a better tune.

And so far the xs11.com community is amazing. Everybody is looking to sell parts cheap and help troubleshoot problems. The only thing that comes close to it is probably the VW scene (I built 7 of those before I got into bikes).
 
+1 for XS11.com! I regularly check in over there still, and I haven't had my 11 for about 3 years. Certainly more of a resto group, but if you lean on them hard enough, they accept the racer boys too!
 
Fix said:
I do recommend buying a forkbrace. If you can't find one, tkat from xs11.com sells one for about $100 shipped that is great. It's what I run. It really tightens up the wobbly front end on these bikes.

http://tkat.com/forkbrace.html

It actually does have a fork brace on the front, above the fender. I haven't had it on the road enough to really see how it handles. I've probably only got 60 miles on it so far, and I've been taking it pretty easy so far.
 
Back
Top Bottom