1979 - 1982 CB 750 - 900- 1100 Extended drag swingarm

f1andy

Been Around the Block
i have a extended drag swingarm forsahttp://img197.imageshack.us/g/080wls.jpg/le as it says its for cb 750, 900 or 1100 looking to get $100 if intrested send me an e-mail at andrewrobertstl@hotmail.com

http://img197.imageshack.us/g/080wls.jpg/
 
not totally sure all i know is that its an early suzuki gsxr swingarm modified and stretched to fit the 80s CB Hondas what ever the length of a 88 gsxr swing arm is i would say add 2-4".
 
Hmmm........
well hell....it 'looks like' exactly what I've been hoping to find but
I imagine it's pretty wide huh?
 
No not really the stock wheel bolts right in without needing to make spacer all the machine work has been done to fit it to the frame its pretty sweet your welcome to come take a look I'm in mississauga ontario my e-mail is andrewrobertstl@hotmail.com
 
Ha! Well that's a bit tough for me......I'm in Oregon, USA.
I like the look of it and I have a project I think that could be adapted to.......willing to take a few measurements for me?

Here's what I'd need, at least to be sure I can use it:
>width of the pivot tube (where it meets the frame)
>length from the center of the pivot to roughly the middle of the axle adjuster slots
>over all width at it's widest over all point, just for my curiosity..

thanks man!
 
Width of the pivot point is 9 3/4". From center pivot to center adjuster 26". The widest point is 12 1/2". I hope that helps you out if have any more questins shoot me an e-mail
 
Cool, I didn't get out ot measure my frame last night like i wanted. I'll ping you ASAP on it and we'll go from there.
 
Back
Top Bottom