2-1 exhaust on a cl360

[NosePicker]

I've been thinking of running a single yoshimura can.....
Any problems I might run into with this setup?
And if it is possible, what can size would work the best for the ol scrambler?

All thoughts and opinions will be taken into consideration!
LETS HERE EM!

 

[crazypj]

2:1 on 360 isn't a problem, they are more critical of exhaust length, particularly if you fit K&N filters

 

[NosePicker]

Critical in what way?
At the moment the pipes are cut where the mufflers used to start, straight pipe. And im running 32mm mikunis with k&n pods.
So this would be considered.....bad?

 

[crazypj]

Carbs will be fine, jetting will need setting up
You lose a lot of performance until exhaust ends behind rear axle. (and you didn't have a lot to start with )
They just don't like short pipes

 

[Sonreir]

Carbs will be fine, jetting will need setting up
You lose a lot of performance until exhaust ends behind rear axle. (and you didn't have a lot to start with )
They just don't like short pipes

+1

The 360s like a long exhaust. With the pipes ending around the rear axle, there is a real sweet spot at right around 7,000 RPM (at least with my cam) where you can feel it sing.