2-into-1 Exhaust

[Maritime]

Ok I bumbed a bit, I was going to use the 2-into-1 I scored for my bike, it fit during mock up fine but I didn't have the the rear brake lever installed, as soon as I put that on and hooked it up, exhaust didn't fit anymore. I don't know what bike this is actuallty for but it isn't the CB/CM400/450's. If you have rear sets it will likely fit as your brake arm would be relocated. The exhaust is solid, the paint job is ok, I would sand and repaint for a smoother finish. Anyway I am Asking $100 OBO plus shipping, if it can be shipped, I have to see if it will come apart. I am pissed it won't fit as now I might have to bolt the stock exhaust back on and it is heavy and ugly. Let me know if you anyone is interested. I will also have some brake parts, disks, calipers etc. if anyone needs those.

 

[Cafe_to_go]

Do you happen to know if this would fit a CB350 twin?

 

[Maritime]

I am not sure, it fits the ports on my head 400/450 twin year 78-86. If yhe CB450 has the same dimensions it would fit that much. The problem I have with it is it hits the rear brake lever. I looked at the MAC system and it has a bend to go over the lever, this exhaust goes straight along the bottom of the bike just below the pegs. It doesn't have any part #'s or anything I don't know who it is made by.