32mm Mikunis SOLD SOLD

[Big Al]

Selling a pair of brand new 32mm Mikunis only put on about 40 miles on these carbs.
They're too big for my bike would be better suited for 450cc or 650cc bike.
$200 FIRM or they hang on the wall as decoration.Located in Welland Ontario

 

[Tim]

Re: 32mm Mikunis

Could you provide jetting / slide info?

 

[surffly]

Re: 32mm Mikunis

yes they are to big for a stock CB

do you have the throttle cable and mainfolds for a CB?

 

[AimSmall]

Re: 32mm Mikunis

Damn, I just bought 32's for CL360! I hope I have better luck then you did, Open exhaust and K&N's are my only upgrades right now and yeah, it has the same jetting you got.....

 

[AimSmall]

Re: 32mm Mikunis

You can make them work but you'll be playing around with jetting for a while i went one size bigger on the main jets and that helped another size again would bring it close .The problem is the venturi size is so big that there's not enough flow from that small engine to create enough vacuum to make to suck gas out of the main jet therefore the need to increase jetting.
With patience and perseverance i'm sure i could've made them work but i have better things to do with my time "Like riding"

It's pretty damned annoying that they sell these as "ready to run" for these bikes but then they need to be screwed with to make them work. I guess I'll be screwing around with mine for awhile to try to make them work.

 

[surffly]

Re: 32mm Mikunis

most of the problems come from VERY different set ups that people try to run with these much larger carbs.
also with a stock motor its way to much carb to really make any gains with

 

[DC74inc]

Re: 32mm Mikunis

what would need to be changed in order to get a good run out of a mikuni 32 on a 350-400cc?

 

[Tim]

Re: 32mm Mikunis

Not sure - you'd be best to Google your specific model of bike / Mikuni VM to see what other people have done. 32's might be big for a 400cc bike (I run 34's on my XS650 and 32's on my BMW 750).

 

[surffly]

what would need to be changed in order to get a good run out of a mikuni 32 on a 350-400cc?

cam
port?
HC pistons
tunned exhaust
stacks or good filters
ignition