I recently purchased a small 3D printer for my business. It prints in ABS/PLA plastic with about a 4"x4" capacity. I use it mostly for prototyping small parts and just general messing around. I'd be down to work with anyone to 3D model/print some one off parts and get some time on the machine. The plastic is pretty rigid, and is significantly stronger in the X/Y direction (highest strength runs along the direction of the strands, as seen below).
Can also use these prints as molds for casting metals. ;D
Below is a carb support spacer I printed for the 360. First prototype so far relevant to motorcycle building. Cheers!
Can also use these prints as molds for casting metals. ;D
Below is a carb support spacer I printed for the 360. First prototype so far relevant to motorcycle building. Cheers!