4LS GT750 Brake FOR SALE, wheels SOLD

pacomotorstuff

Coast to Coast
I'm going to post these parts on ebay in the next couple of days but before I do, I thought some VRRA and DTT members might be interested in them.
SOLD HONDA 250 / 305 CB72 / CB77 FRONT WHEEL COMPLETE W / DLS BRAKE SOLD
This is an outstanding upgrade to the CB350 Honda - or any drum brake Honda for that matter (we were going to put it on our 175 twin). Hub and brake backing plate are in excellent condition. Light surface rust on the drum but no ridges or pits - will clean up okay (rusty from 40+ years of inside storage). Spokes dull, but not rusty. Stock chromed WM1 (1.60") rim is a 7 out of 10 but completely usable and could look outstanding with some elbow grease. Has had 1" cooling holes drilled in the backing plate and hub. Includes a new set of Vesrah brake shoes as well as the set installed (still good). Brake cable is usable (no cracks or fraying) but could use a good lube. Speedo drive included. Came off of a Greeves 250 that someone was converting to a road racer.
SUZUKI GT750 4LS FRONT BRAKE W/ 18" SPOKE KIT AND CABLE SPLITTER $450.00 FIRM
Complete brake in outstanding condition. The only thing missing is one of the small actuator arms on one side. Very, very light surface rust on the drum faces - which will clean up easily - from sitting on the storage room shelf for many years. The brake shoes don't even look used. Complete with axle and machined spacers (no speedo drive), a brand new Walridge Motors 18" spoke kit and Cosmopolitan Motors cable splitter. This was originally bought for our BSA cafe bike, which in the end was broken for spares.
YAMAHA TD1 250 REAR WHEEL $400.00 FIRM
We were going to use this on a cafe bike but it deserves to go back on a TD1. Has the period-correct WM1, shouldered Japanese alloy rim. Missing the backing plate and shoes. Needs restoration.
SOLD HONDA 250 /350 CB72 / CB77 REAR WHEEL W/ ALLOY RIM AND DLS BRAKE SOLD
This wheel was refurbished many years ago and rescued from a corner of a storage room.
The hub is in very good shape - was resprayed at some time with the factory silver colour but could use a respray again due to storage scratches, etc. - or polish it up for some bling, your choice. The brake drum surface has very light rust but will clean up fine (no ridges, gouges, etc). The shoes look new. A number of the spokes have very light surface rust, probably from sitting in storage for so long. The rim itself is an alloy WM3 (2.15") Sun Rim from the 70's. As far as I can tell, no tire was ever mounted (no marks of any sort). What may have to be done with the wheel however, is unlacing some of the spokes, touching up the rim holes and then truing the wheel, as some of the spokes aren't bedding in correctly to the rim.
NEW DID 17"X1.85" (WM2) RIM, KING 3.25X17 TIRE AND INOUE TUBE $75.00
We bought the rim, tire and tube for a Honda CD175 restoration but never used it. Everything is brand new, but has been in storage for a couple of years. Tire has been stored correctly (in a dark corner of the storeroom at fairly cool temp). The only blemish on the rim is a surface scratch about 1/2" X 1/4" - I think where another rim in the tire rack may have been rubbing against it. If you need a CD175 rear hub, I can toss one in with the sale but the front is gone. Sorry, no spokes.
If you'd like to have some photos and discuss prices, email me at pacomotorstuff@cogeco.ca or call me at 905-873-3171.
Payment by paypal is preferred, prompt payment by cash is okay, but -sorry - no cheques of any sort.
I'm in the Greater Toronto Area. You are welcome to pick up at the house in Georgetown or I'll ship anyplace at your expense. I'm offering free delivery up to 75 km from Georgetown if any of the remaining parts are sold at the prices listed.
 
Back
Top Bottom