71 cb350. Warm Beer.

Re: 71 cb350. round two.


well found it was a connection in the kill switch. fixed that and now it runs again. but now my neutral light doesnt work hahaha its always something i guess. i was switching through on to accessory mode to check and see if that still worked (which it did) and then switched it back to "on" (when the neutral light comes on) and now nothin. this fuckin thing is possessed, or im just a moron that should probably get some sleep. im thinking its the latter of the two. ;D
 
Re: 71 cb350. round two.

found out that the led i had went bad some how. had another led laying around, wired it up and stuck it in the new chrome bezel. everything works as it should now. thanks for the help guys.
 
Re: 71 cb350. round two.

got everything with the new dash and gauges sorted and finished today. everything works as it should. i started off yesterday by labeling the new speedo with the OG miles the bike had on it.
photo2-25.jpg

then i used some candy apple paint to make a "distinct redline" for the tach. masked it off and sprayed. (dont mind my nasty, smashed and blood blistered thumb nail.)
photo1-24.jpg

took the top triple clamp off and the clip ons off to slide the chrome plumping pieces i cut down to cover the nasty pitted forks. tank up to extend the 4 wires for the ignition.
photo3-17.jpg

everything polished up and in its place. the neutral light is very bright.
photo2b.jpg

another shot.
photo3b.jpg

and the bike.
photo1-23.jpg

.
photo2-24.jpg

the end.
 
Re: 71 cb350. round two.

well jeez, now the front looks to good with the low maintenance look you said you were going for ;) good job man
 
Re: 71 cb350. round two.

i know.. :-\ atleast when i have the money to have it painted the right way, the front end will match. haha
 
Re: 71 cb350. round two.

oh yeah i also finally got back my rearset mounting plates from my buddy's waterjet machine. they will mount on the outsides of the passenger peg mounts.
photo2r.jpg

.
photo3r.jpg

and a general idea of how they will look.
photo1r.jpg

now i just have to make the shit linkage and slap them on. updates soon.
 
Re: 71 cb350. round two.

Just read the whole thread through. Nice job! I really like the chrome headlight bucket and your fab on your plate for the gauges. Makes me want a chrome bucket!! I am thinking on rear sets from Motobits.
 
Re: 71 cb350. round two.

thank you. yeah, the motobits are a nice set up, i have them on my cb175. i didnt run them on this bike because of the exhaust being in the way, as the motorbits rearsets hang pretty low on the passenger peg mount. they would work great for your cl though, given you still have the high pipes...
 
Re: 71 cb350. round two.

Hey did you ever figure out what that ticking was. I took my bike on a 40 mile ride cruisin about 65 the whole way and when I started back home my bike was doin the same thing except worse. I went ahead and took the heads off and am rebuilding it now.
 
Re: 71 cb350. round two.

I will have to purchase a cb350 kicker though as it will hit. They are supposed to be a direct swap.
andrew said:
thank you. yeah, the motobits are a nice set up, i have them on my cb175. i didnt run them on this bike because of the exhaust being in the way, as the motorbits rearsets hang pretty low on the passenger peg mount. they would work great for your cl though, given you still have the high pipes...
 
Re: 71 cb350. round two.

this is what she looked like when I first got her
 

Attachments

  • baby blue 2.jpg
    baby blue 2.jpg
    231 KB · Views: 411
Re: 71 cb350. round two.

man, your bike looks clean! really looking forward to seeing it come togeather. now you have to make a thread for her. :D
 
Re: 71 cb350. round two.

stupid post but whatever. my headlight height and how far it stuck out always bothered me, so i cut and reshaped the headlight ears to bring the bucket down and closer in towards the triple tree.
headlightears.jpg
 
Re: 71 cb350. round two.

Thx Andrew. There was some work in cleaning her up.I started a build thread under the name "baby blue" I have more pics on my phone, I will try to post later.
andrew said:
man, your bike looks clean! really looking forward to seeing it come togeather. now you have to make a thread for her. :D
 
Re: 71 cb350. round two.

Hey Andrew,


I like what you did with you headlight bracket. Looks a lot better, nice and snugged up how you have it now.


Good thinking.
 
Re: 71 cb350. round two.

got my pipes in from colombia river yesterday and my buddy and i built up the new two into one exhaust tonight.
hung the muffler in the rough area of where i wanted it to sit.
e13.jpg

used a few inches of the stock headers (just for the correct size couplers) and welded on 2 pieces of the 90's i cut.
e14.jpg

the head pipes are pretty symmetrical, even with the merge collector being off set to the right side of the bike. (i can still get to the drain plug and change the oil without removing the exhaust)
e4.jpg

welded a piece of 1 3/4 pipe to the end of the merge collector and shoved the other end into the muffler. no leaks here! (no photo)
then with the muffler and merge collector in its place, we made and tacked the remaining 70 some degree bends to the existing 90 head pipes that were tacked on prior.
e12.jpg

.
e10.jpg

i went a grabbed some food for my buddy and i while he did the final welding. came back to find it all done.
e2.jpg

.
e10.jpg

.
e6.jpg

.
e3.jpg

after it all cooled down, i took it back off and painted the pipes with high temp paint to help the pipes from rusting. after the paint was dry, i soaked the remaining heat wrap i had and wrapped em up.
e8.jpg

.
e7.jpg

loaded the bike up around 1am, drove home 20 minutes only to unload it at my house, grab my helmet and gloves and took it for a spin to the bar and am home now, tired smelly and ready for bed. ill post up some better photos tomorrow in the sun light. rearsets next! ive got alot of room to play with now. updates soon.
 
Re: 71 cb350. round two.

Nicely done. I'm thinking of doing a similar setup since the stock exhaust is in the way of the rear sets. Great work.
 
Back
Top Bottom