i'm using excel rims with avon roadrider tires. 100/90 - 18" rear, 90/90 - 18" front. theyre mounted to excel rims. i can't remember the specific type but i think they're 2.5" wide.
clearance for calipers in front is definitely something to watch closely. my setup has about 4mm to spare on each side. the biggest factor in successfully clearing the calipers is primarily the width of the hub flange itself. the spokes also will certainly need to be laced inwards.
that gsxr conversion hub looks good. i think it is the product of a prototype that was mentioned in a different thread on this board, and the guy seems to have successfully set it up - so i would say its good to go. i wish that was available back when i built up my front wheel. it would have made things simpler for me.
i cannot definitely answer whether it will work for you with your particular choice of rim/tires.. i think you'll be OK - but this will be one of those "proof is in the pudding" moments. no bones about it.
-tim
clearance for calipers in front is definitely something to watch closely. my setup has about 4mm to spare on each side. the biggest factor in successfully clearing the calipers is primarily the width of the hub flange itself. the spokes also will certainly need to be laced inwards.
that gsxr conversion hub looks good. i think it is the product of a prototype that was mentioned in a different thread on this board, and the guy seems to have successfully set it up - so i would say its good to go. i wish that was available back when i built up my front wheel. it would have made things simpler for me.
i cannot definitely answer whether it will work for you with your particular choice of rim/tires.. i think you'll be OK - but this will be one of those "proof is in the pudding" moments. no bones about it.
-tim
sailer said:@timmysf
What rim/tire combo are you running?
I'm going with this hub ->http://cognitomoto.com/collections/gsxr-conversion-parts/products/gsx-r-hub-bolt-on-conversion-laced-wheel and sticking with 17" rims.
With that said, I'm thinking about 17x3.5 rim both front and rear with a 120/70/17 in the front and a 150/70/17 in the rear.
I know I'll have to off-set the sprockets but do you think fitment will be ok with the above setup?
Also did you have any issues with caliper clearance in the front? A lot of people are lacing their front wheels with all spokes facing inward to make sure they have clearance but it still makes me nervous.