Big R
Heaven is so far away.
Wow. That thing is looking brand spanking new.
About the piston rings (I know you're past it), just soak them with a little bit of oil before making their way into the cylinders. There's a tiny little chamfer on the bottom of the walls to guide the rings in. Chalk one up to Mr. Honda.
And if the 450 cam chain is anything like the 175 (probably not), make absolutely sure that the chain is on the crankshaft sprocket. Mine was off a little bit and it came loose after I had the motor back in the frame. It sucked. Big time.
About the piston rings (I know you're past it), just soak them with a little bit of oil before making their way into the cylinders. There's a tiny little chamfer on the bottom of the walls to guide the rings in. Chalk one up to Mr. Honda.
And if the 450 cam chain is anything like the 175 (probably not), make absolutely sure that the chain is on the crankshaft sprocket. Mine was off a little bit and it came loose after I had the motor back in the frame. It sucked. Big time.


















