Plate frame with area for electronics:
Template....
Mounted some of the electronics:
A neat little place under the stock battery box to mount the ignition box. After, I zip tied it to really hold it in place. I forgot to get a shot of the whole box and with the turn flasher mounted :-[.
My Friend Andrew (drew84) took a few shots last night with his really cool camera and equipment.....He's going to take more when the bike is finished.
Oops, I noticed a little oil on the exhaust pipe and tightened the three screws this morning.... I need to go over everything before I ride this bike.
And my favorite
My friend Steve came by the garage today and dropped off the decals for the tank. I only asked him for the tank decals because he is very busy but eventually when I come up with a design for the side covers I'll have to ask him for his help again......I think they came out great. More pics to come......
"if it were mine i would do the tank trim at the bottom in black"
It's funny you say that because I was planning on running a strip of automotive edge guard (black) along the bottom to replace the factory chrome piece. I am going to paint the lip black before I put the edge guard on though because I don't think the edge guard will cover all the way to the top .
I was on Acewells site before and missed the diagrams so thanks for posting those!
I got some touch up paint from the auto body shop and applied a coat on the base of the tank.
When the paint dries I am going to apply the edge guard
Thanks Typhoon...I was really unsure if I wanted any gauges at all because I really like the simple look too. After looking at the L.E.D.s on the bike I figured a digital gauge would work well with the modern look I am going for.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.