76 CJ360T custom Street Tracker 7.000 og miles screamer

Greenbush

Got some bennies to keep me going? Must finish..
I need to move my little Screamin Tracker. Time to move on to my other projects draggin me down.
Take a look at my ad on CL and hit me up with any questions. There is a ton of info in the ad.

http://losangeles.craigslist.org/lac/mcy/3423042627.html

Thanks :D

IMG_1981.jpg



Quick little video.

 
Ohhhh, you likey my fork brace, huh Chewy? Well it's a solid chunk of aluminum, about 3/8th thick by 4" wide, that was just sitting around the shop I was working at at that time. Took a lot of bending and forming with a bender and then a hammer, bench clamp and different pieces of wood. It's super strong.
So, it is a 100% 1 Off part.
 
Greenbush said:
Ohhhh, you likey my fork brace, huh Chewy? Well it's a solid chunk of aluminum, about 3/8th thick by 4" wide, that was just sitting around the shop I was working at at that time. Took a lot of bending and forming with a bender and then a hammer, bench clamp and different pieces of wood. It's super strong.
So, it is a 100% 1 Off part.

Thats what I figured - me likey LOL.

Nice work, I may have to try and make something similar...maybe not 3/8" thick though...
 
Yeah, it may be a bit thinner than 3/8th. Been 2 years since I did it. But it was a bit of a chore without the proper bending tools. I had a cheaper bender, Harbor Freight, but it was only capable of bending so far. I was thinking of copying the brace and selling them. A buddy of mine recently bought a 3D printer and I could utilize it to repeat and make some casting molds.
I would have to see if what I could sell them for and the demand would make it worth it. What you think?
 
Silencer assembly is off a Honda CRF450F Motocross bike(titanium and aluminum). Plenty of breathing with quietness on the bottom end. Gets a great thub thub idle sound with air balls bursts felt when standing behind the bike up to 8 feet or so.
 
Back
Top Bottom