'77 CB750 Overhaul (HELP A NEWBIE OUT!!!)

This is what you want to find, but these are a race set for two carbs

http://www.ebay.com/itm/BANSHEE-PARTS-KEIHIN-Mikuni-Hex-Style-MISC-LOT-PILOTS-Carburetor-Jet-Selection-/172108398660?hash=item281275c044:g:hZgAAOSwqYBWn-mz&autorefresh=true

s-l1600.jpg
 
Personally, I buy old sets of carbs and pillage for parts. Unless you're up-jetting, the stock jets are better.
 
deviant said:
Personally, I buy old sets of carbs and pillage for parts. Unless you're up-jetting, the stock jets are better.

And fortunately the stock slow jet should work fine for a lightly modded stock motor, especially since you have those handy dandy adjustable needles.

I have had pretty good luck with the Keysters, but I've heard some bad things about quality control. Just like with anything else, check your parts
 
coyote13 said:
And fortunately the stock slow jet should work fine for a lightly modded stock motor, especially since you have those handy dandy adjustable needles.

I have had pretty good luck with the Keysters, but I've heard some bad things about quality control. Just like with anything else, check your parts

Glad you mentioned this. Daft as it may be to consider if the rest of the engine appears to be in solid shape upon inspection I'm considering improving the performance further such as upgraded cams, bore and what not...

Could the large slow jet come in handy if that becomes a reality?
 
I doubt it, I don't think there's any use for a slow jet that big under any circumstances, even if you were increasing displacement. I think I have 38/40 and 125's and it runs great with aftermarket filters and a nice 4-into-1. Planning to go 836, with a weber cam and some headwork soon. I honestly think I might be able to get away with the 125 main even after all that. We'll see once it's all back together and I do some plug chops.

Also... If you're planning to have any headwork done you're gonna have to pull the motor, might be a good time to do any engine upgrades your planning to do in the future like adding a cam and what not.
 
coyote13 said:
I doubt it, I don't think there's any use for a slow jet that big under any circumstances, even if you were increasing displacement. I think I have 38/40 and 125's and it runs great with aftermarket filters and a nice 4-into-1. Planning to go 836, with a weber cam and some headwork soon. I honestly think I might be able to get away with the 125 main even after all that. We'll see once it's all back together and I do some plug chops.

Also... If you're planning to have any headwork done you're gonna have to pull the motor, might be a good time to do any engine upgrades your planning to do in the future like adding a cam and what not.

Interesting. I wonder why they even made the 58 (if that truly is one of the culprits of my "richness")...

I'll look forward to hearing about your upgrades! I need to get some progress photos up here on this thread too. People are going to hate all the dialogue with photos lol >:(
 
They could be used in a different application, but I'd be thinking probably a liter bike.

I haven't done much since pulling the motor but once I get my shit together I'll post some updates. I'll be following along here, love the little nuances of the 77-78's
 
Gawd dang, didn't realize it's been sitting so long. And I just hit my 836th post, guess it's time to get around to doing that 836 kit, haha! I kicked around on forums.sohc4.net for a few years before making my way over to DTT, that site is one hell of a resource for these CB's.

http://www.dotheton.com/forum/index.php?topic=61977.msg708500#msg708500
 
Back
Top Bottom