Brodie said:Get a new reg/rec. For the price of them it is a worthwhile upgrade.
Just for reference I have been running my ballistic for about 3 years now and have never had a problem with the stock unit.
Sonreir said:Lead acid batteries are great at absorbing additional current. They burn off the extra power by boiling their electrolyte. Many early model bikes (before 1970 or so) didn't even have voltage regulators; they just used the battery.
What I'm getting at is that a large battery can be a (temporary) substitute for a failed voltage regulator. As least with flooded cell lead acid.
As soon as you upgrade to a newer battery type, where boiling the electrolyte is not an option) you will see battery failures and possible blow some bulbs as well.
A working regulator is a must-have item for using any modern battery technologies.
How many wires and what colors do you have coming from the alternator?
Sonreir said:Diode test is only for the rectifier portion of the R/R. There isn't an easy way to test the regulator other than getting the bike running and monitoring the voltage levels. Lead acid will definitely absorb some additional current, but if the voltage clamps and holds around in the low 14.xV range, then you're probably good to go.
And yes, our single phase R/R will work on your bike.