gregajo
wrenching in the bad oil garage
Hey All, Been learning alot reading everyones entries here on DDT. Thanks for all of the great info! Decided to begin sharing my experiences in trying to build a cafe racer for the first time. I am not a mechanic so will be learning as I go. I welcome any advice I can get! Bought a 1971 CL 350 from a friend of a friend that had not run in a long time. It was complete but and needed plenty of TLC. I stripped it down to the frame and ground off unwanted tabs. I have decided to try to get a roller put together first and then tackle the engine later. I watched a You Tube presentation on how to make a seat pan that Herm from Dime City Cycles posted and decided to give it a try (thanks Herm!). Working with fiberglass is messy but had a good time. I also had some design help from one of the cats, Ink Spot, who has been overseeing my project. I am taking a welding class where I work (I teach at a junior college in Florida) and will be mounting a battery tray under the seat hump and mounts for other electrics soon. I have the tank and seat pan ready for paint and hope to get the frame and other chasis parts powder coated soon. Next step will be to tackle the suspension, brakes and wheels.
Project bike brought home for tear down.
Stripped down to frame.
Designing the seat pan and hump with my project manager Ink Spot.
Ready for fiberglass.
Decided to do the fiberglass with the form still on the frame.
Tank and seat pan primed and ready for paint.
Project bike brought home for tear down.
Stripped down to frame.
Designing the seat pan and hump with my project manager Ink Spot.
Ready for fiberglass.
Decided to do the fiberglass with the form still on the frame.
Tank and seat pan primed and ready for paint.