A seat question...

Meach

New Member
Brace yourselves for a newbie question...
So I've searched and searched... and it really seems like there isn't much, if anything, out there in the way of a seat that can convert from a bump-stop to a two person.
I'd even be willing to have the bump-stop seat a quick release and easily interchangeable.
I don't think making my own would be the best idea, since I have no welding or fiberglass experience whatsoever, and I'd rather be broke than miserable on a ride ;D

Any help would be greatly appreciated... I know I haven't contributed much, but as I learn I'll do my best.
 
Yeah... that seat is almost as much as the bike was. :-\

I appreciate the help gents.. I'll keep searching. Any advice on maybe a quick release style?
 
The only way to get the price down will be to make your own, unfortunately.

I would suggest starting with another stock seat pan, as most are fairly easy to remove/interchange to begin with.

Many stock seats pivot on removable pins, so starting with a stocker seat pan may be one way to go.

Use one pan for your 2-up seat, and the second for your single w/ bum stop. If you do the bum stop out of foam and then upholster the whole thing it could look decent.

What bike? How far from stock is it?

2 up also get into the question of passenger pegs. If you go for rear set pegs and controls you will need to figure out a new position for passenger pegs as the rear sets will probably be too close for the stock pass peg position.

Best of luck!
 
Contact Saint Motorbikes... http://saintmotorbikes.com/

He made a fantastic brat to cafe style seat.

SDC10044.jpg


SDC10058.jpg


SDC10055.jpg
 
Oh My! That's perfect! where did he mount the battery? (again. total newbie question, apologies.)

It's a 500T, and it's currently really far from stock.. (meaning it's in pieces in the garage ;D )I just started tearing it down and it was almost totally stock when I started (aside from some clubman bars) I've been taking some pictures and plan on starting a build thread this week. so I'll keep you guys posted.

And I'm not sure on the rearsets yet. I'm gonna see how comfortable the seat makes the ride before I make any of those decisions...

This forum is awesome. Thank you guys!
 
Dunno, exhaust wrap works pretty well if it's done right.
I would double up under the seat though
Looks like the frame bracing was cut out though, that's really going to improve handling ::) (it was changed on 75 models because rear end flexed too much)
Looks pretty, but, not safe to ride fast (no fork brace either, 34mm forks really need one, even more than the 35mm forks)
Edit number 4 ;D
The more I look at it, the more I realise it's not done for any sort of performance application, looks only.
As 'art' I like it,as a rideable motorcycle, the guy doesn't have a clue

Meach said:
And I'm not sure on the rearsets yet. I'm gonna see how comfortable the seat makes the ride before I make any of those decisions...

you need rearsets to see if seat works.
Without rearsets, it WILL be uncomfortable
 
Very true, PJ, but those things are easily fixable.

And the battery and other electronics are under the tank.
 
Fork brace is easy but re-welding tubes into frame wont be (it will mess up the paint a lot)
The rear shocks look like they came off a 125?
Follow link to see what frame should look like
http://imageshack.us/photo/my-images/195/framedimensionsearly.jpg/
 
Typical, a custom builder who doesn't give a shit as long as they get the cash >:( ::)
 
So why did he cut out the section of frame that stops it flexing? (bracing above swing arm pivot to center tube)
Because 'customer' wanted open triangle?
If he's so 'stand up' he should have explained not only it wasn't a good idea but is actually dangerous
Yamaha increased diameters, thickness and angles of tubes for a reason.
It's the reason I linked to frame pics
 
Hey man. I am not trying to get into a pissing match with you. I have built bikes with performance in mind, and I have built bikes just for aesthetics.

I just wanted to show the original poster a pretty cool setup for a dual purpose cafe seat.
 
The seat IS cool. 8)
aesthetics shouldn't be a bigger consideration than safety, it isn't a pissing match, just saying it's wrong
 
Back
Top Bottom