Alberta CB450

fly

New Member
Hey guys. I figured since I have been hanging around the site for about 14 months now - being filled with information and inspiration - that I would finally get around to sharing my project from last winter. It is a 1974 CB450 that I bought locally from a chap who had intentions of restoring it and just never got around to it. The bike had 9500 original miles on it. Last week I finally got around to taking the camera out with me when I went for a ride.

Most of the parts come from Benjie's Cafe Racers - steel tank and seat, clip on bars, stainless pipes, rearsets, headlight bracket. Frame was modified and trimmed, fenders shortened and then all powdercoated along with the rims. Hubs polished and relaced with new spokes. Tires are Avon Roadriders. New fork tubes from Tarrozzi and rear shocks are Progressive Suspension. Picked up nos switchgear and speedo on ebay. Head bearings converted to tapered rollers, swingarm bushings are custom machined bronze pieces, stainless braided brake lines, CRG barend mirrors.

Bike is still electric start (if you don't feel like kicking it) with all electrics and battery located under the seat hump.

She is my first project and was a lot of fun to do and is truly a blast to drive. I have a couple of Ducatis and I can honestly say this is just as much a smile maker and gets as much attention from people on the street.

Thanks all for the great ideas and information that is shared. I know I really should have taken pics along the way but just never got around to it.

HONDA003.jpg

HONDA002.jpg

DSC01147.jpg

DSC01296.jpg

DSC01298.jpg

DSC01297.jpg

DSC01301.jpg

DSC01295.jpg
 
Holy s@#$, killer rig. I'm working on a 450 myself. What type of exhaust are you running? I've been looking all over for just such a system. Any info. would be appreciated.

Thanks in advance,
Bukowski.
 
Bukowski said:
Holy s@#$, killer rig. I'm working on a 450 myself. What type of exhaust are you running? I've been looking all over for just such a system. Any info. would be appreciated.

Thanks in advance,
Bukowski.

Hey, thanks for the compliment. The pipes are stainless and are from Benjies Cafe Racers. They are very nicely made and fit perfect. They mount at the same point as the rearsets to the custom bracket the Benjie did for the bike. It's quite cool as he requested my inseam measurements, arm length, height etc when building the pieces so you end up with something that is reasonably comfortable. He provides complete measurements for welding of the brackets to the frame and everything mounted up perfectly. There was a little bit of "tweaking" to do with the linkage for the rear brake, but nothing too difficult.
 
Basement rat said:
BTW, Nice bike!

The clearest weather we've had all year were having now. Too bad its so damn cold :(.

No kidding. Just got back from a short ride and turned on the fireplace to warm up.
 
Back
Top Bottom