Big Rich said:
Welcome to DTT man! I dont know of anybody too close to you, but there are a lot of members from Pittsburgh.
Any pics you could upload of the Triumphs?
There's quite a few pics of the dragbike on my website,
http://KellerRacing.net. Although I made some major changes this year. I had a few sets of Ironhead sportster forward controls laying around so I made up a set of rear sets for the drag bike from them. They're mounted on the rear axle plate (rigid '63 frame, '71 motor w/Morgo 750 kit). Then I added a set of clubman bars using Honda clamps (clubmans wouldn't fit in the Triumph P clamps). Problem then became I was laying down to much and my helmet kept banging on my shoulders when I tried to lift my head to see. Made a few runs that all I could see was my front wheel! Soon went back to drag bars and Triumph P clamps.
On the '68, some back story is necessary. Had this bike about 20 years. About 17 years ago, tore it apart to paint it. A friend of mine and I painted it. Then I bought another bike ('71 Bonnie) so this bike went to the back of the queue. During the next 17 yrs, I moved 6 times (mostly work related) so you can imagine how scratched and banged up the new paint job got. I decided this yr to put it back together, cafe style, and didn't want to take the time to disassemble what I had together to repaint sooooooooo........ I just started putting it back together. Bike is all dark blue metallic and black. I'm trying to dig up some before shots of the bike and I'll take some current ones and post them. I'm just finishing up the wiring now and then I can get it off the stand and start bolting the remainder of the parts on. I'll be running black powder coated drag bars as the clubmans force me to bend over to much and back won't take it any more (to many years on a hardtail Panhead).
Next project is a '67 TR6C I've had laying around for about 12 years. It's a hard tail so I guess a bobber/chopper is in my future. Then the '71 needs a top end and some paint. Just sold my '61 and Hagon frame, to many projects. Decided to concentrate on unit Triumphs and forget the pre-unit stuff. Then I have another frame and engine for another drag bike (different style, dirt bike front end, different style motor, Posa fuel injection, etc, etc, etc

)).
In regards to location, Irwin is a little bit west of Greensburg, right on Rte 30. That makes it about 1/2 hour southeast of Pittsburgh. Haven't seen many posts from this area. I know quite a few Brit bike fans from this area (no cafes though). Some bobbers/choppers and some stockers.