Bark busters / hand guards and small windscreen wanted
- Thread starter Rich Ard
- Start date
no instructions included 
srsly tho you will want to clean all threads lose the uneeded warshers and use a cupl new pieces of rubber hoes
mount them so they are just about level point down only slightly,dont be a scared to rebend slightly if need for better fit
semi cool story about me now....
i started out when i was making my own selling them at the enduros events the day before,i set up and would mount them on the bikes as i sold them
if i had to bend them slightly to fit i would use the swingarm or frame for a bending fulcrum 8)
one day i made over 500 dollers sellin handguards, big money then,this was way back in 83 or so and when handguards first started getting popular
...you HAD to have them if you wanted to compete...specially us A riders as the guys that layed out the course were masochists the single track was almost impenatrable without handguards to bust the bark and we were on the first early minutes punching out saplings all the way
i named mine "debarkers"
i stlll have an old dirtbike magazine test shootout of handguards and mine are in there along with the barkbusters, jeff fredette's racing brand etc
eventually i made and sold a few thousand pair to the distibuter at the time...
rocky cycle,hi-point and malcom smith all bought and sold my handguards...
it was soo cool because the one place sierra dist i used to deliver them and they would let me go thru the warehouse and buy anything at dist cost !!
srsly tho you will want to clean all threads lose the uneeded warshers and use a cupl new pieces of rubber hoes
mount them so they are just about level point down only slightly,dont be a scared to rebend slightly if need for better fit
semi cool story about me now....
i started out when i was making my own selling them at the enduros events the day before,i set up and would mount them on the bikes as i sold them
if i had to bend them slightly to fit i would use the swingarm or frame for a bending fulcrum 8)
one day i made over 500 dollers sellin handguards, big money then,this was way back in 83 or so and when handguards first started getting popular
...you HAD to have them if you wanted to compete...specially us A riders as the guys that layed out the course were masochists the single track was almost impenatrable without handguards to bust the bark and we were on the first early minutes punching out saplings all the way
i named mine "debarkers"
i stlll have an old dirtbike magazine test shootout of handguards and mine are in there along with the barkbusters, jeff fredette's racing brand etc
eventually i made and sold a few thousand pair to the distibuter at the time...
rocky cycle,hi-point and malcom smith all bought and sold my handguards...
it was soo cool because the one place sierra dist i used to deliver them and they would let me go thru the warehouse and buy anything at dist cost !!
