Best type of lifting stand?

rebecca

New Member
Started taking the bike apart but got into diffs pretty quickly due to not having a proper stand to get it off the ground.

So, I'm looking for a stand to help me lift my project up so I can work on it more easily.

The small type rather than the table sort is preferred as space is limited.

Should I be looking at hydraulic lift stands or manual foot stands? Any advice much appreciated.

Would something like this be a good job? http://www.amazon.co.uk/Motorbike-Hydraulic-Scissor-136kg-300lbs/dp/B0047ZVN8W/ref=reg_hu-rd_add_1_dp


Thanks all
 
It really matters what type of bike you are pulling apart. I just finished a tear down of my 75 XL250 I used a combination og a milk creat and two jack stands not very efficient but useable.
 
Usually rear paddock and front headlight stands are good. If you doing a complete tear down including removal of the swingarm and forks then you will need some sort of stand support under the center of the bike.
 
Back
Top Bottom