Bike too heavy for 'new' suspension?

Finnigan

Over 1,000 Posts
I've got gsxr forks that I was thinking of putting on the bmw k100. The stock forks are a little squishy and the gold ones look better IMO. The GSXRs curb weight is around 450lbs vs the K100 which is around 550lbs with all the luggage and fairings taken off. Is this too much of a difference to put the new forks on and have them be an upgrade?
 
that's a significant change in preload, but only about 50lbs on the front suspension. so from that point of view it's within the range of rider weight on the GSXR.
They will be a significant upgrade in adjustability over the stockers, and likely newer tech as well. You might consider slightly stiffer springs than the GSXR stock units to compensate for the increased preload. There are likely lots of options on that front.
You can also insert a spacer to increase preload without sacrificing travel. Depending on the year GSXR forks had adjustable preload that might or might not be sufficient to the task...
 
I'm willing to try that, I also have some 15w fork oil in case they need to be stiffer. They are 2004 or 5 gsxr 750 forks
 
fork oil viscosity affects compression and rebound dampening, but not preload.
Not positive, but some of the dampening rates are adjustable on those forks, iirc.


I would suggest keeping the fork oil swap on the shelf for now, and see how it rides with the stock oil weight.
If you can't get it close enough, then try the oil change.
 
you will probably ruin the handling do some rake and trail calcs but the gixxer clamps are less offset designed with a really steep head angle
you will most likely end up with way too much trail with heavy shit feeling steering
the other negative is lost cornering clearance with shorter forks
preload alone is a totally wrong way to go about stiffening up suspension
in the end if its just for posing go for it
if you want handling get a gold valve kit,springs and a fork brace
 
it IS just for posing but I dont want to ruin the bike in the process. I'll hold off or at least take comparisons of both triples when they are off the bike.
 
xb33bsa said:
you will probably ruin the handling do some rake and trail calcs but the gixxer clamps are less offset designed with a really steep head angle
you will most likely end up with way too much trail with heavy shit feeling steering
the other negative is lost cornering clearance with shorter forks
preload alone is a totally wrong way to go about stiffening up suspension
in the end if its just for posing go for it
if you want handling get a gold valve kit,springs and a fork brace

Just a question, as I'm still learning about motorcycle suspension, and probably always will be...
Doesn't less offset at the triple and a steeper head angle create less trail and lighter, more nervous steering?
 
no less offset increases trail given same angle

traildiagram.jpg
 
plagrone said:
Are we talking about the offset of where the axle connects to the fork lowers?
that offset will be included in any trail figuring, the offset of the yokes as well
 
I thought that less offset made the two lines closer together in the diagram, I also thought that the steeper angle would further decrease the distance between the two lines, I thought that was less trail.

I thought you increased trail by increasing offset and stretching out that front end to a more horizontal angle, at least that was my understanding of the geometry.
 
PLAZACYCLEJOSH said:
I thought that less offset made the two lines closer together in the diagram, I also thought that the steeper angle would further decrease the distance between the two lines, I thought that was less trail.

I thought you increased trail by increasing offset and stretching out that front end to a more horizontal angle, at least that was my understanding of the geometry.
increasing rake WILL increase trail
it is confusing :-[
study the diagram read the page
less offset increase that distance(trail)
if you want modern sportbike forks you need to either get more offset yokes or cut the frame and tuck in the rake that is if the tire will clear shit once you do that
the only problem then is many times the forks are quite short which reduces cornering clearance
http://nswroadandtrackbikes.com/forums/entry.php?6-Rake-and-trail
RakeandTrail.jpg


i
 
Back
Top Bottom