Cafe racer rear set

[Viet]

Hi,

I have just produced this rear sets with following specification:

1. Longer pulling lever (95mm long)
2. adjustable pulling angle with 20 position each only 18 degree
3. It has 10 mm bolt which supported with a 19.5mm steel sleeve. This sleeve reinforces the footrest against heavy weight pushed in the foot rest.
4. It is made of 6mm thick steel so it cheaper but very hard built for lasting that helps its price is only US$ 55/set
5. The small end (push end) is 8mm OD strong enough and small enough so you can put in a gear shift rubber of any bike.

This is my rear set:

 

[trek97]

do you have any linkage options ?

 

[Viet]

Yeah we have but it is mostly in commentary. I could send you 3 clevises for the linkage and 2 linkage rod (6mm). However, it is not what we expected to sell. Just bought on the shop and send you.

Now we have rods set up for cl350, cl450 , cb175. Cost for completed rear set for DDT members is $75. Shipping to US & CANADA is $35 & $30 fo
Gr EU

 

[Spivester]

How can I purchase a set?

 

[SONICJK]

They are on Ebay,
In vietnam.
They look nice but the 25-30something day shipping sucks
Ill take a set if you can get them to me faster.

 

[gt550guy]

what is the link to ebay i cannot find it

 

[diggerdanh]

Here's one:
http://www.ebay.com/itm/250988365426

 

[Viet]

They are on Ebay,
In vietnam.
They look nice but the 25-30something day shipping sucks
Ill take a set if you can get them to me faster.

Actually, it takes 2 to 3 weeks to ship to US and Canada. I could make it faster but shipping cost will be higher (DHL or FEDEX service). My current used service is EMS service

 

[shane_lxi]

Do you know if there are any folding peg options for these? I wanted to retain use of the kickstart on my cl350.

 

[13thenewblack13]

anyone have a picture of these on their bike?

 

[Viet]

Dear shane_lxi,

You're right, rear set will take a bit room for kick starter but my one still working right without the folding peg. Based on my CL350 set up, I see if I take care a bit at time of kicking, then no problem at all. Currently, we has not made folding peg but might be near future we shall do it. Thanks for your comment.

 

[Viet]

anyone have a picture of these on their bike?

Dear thenewblack,

I have it on my bike, please visit this link on my ebay listing: http://www.ebay.com/itm/251002521563?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

P/S: The rear set above selling on ebay at $85, I sell it to DTT member at $75.


Thanks