CB/SL125 parts bike - part out

gnarlycharlie4u

New Member
I have a 1975 SL125 that I raided for some parts.
Here's most of what's left:

bTDC0.jpg

fUA28.jpg

tnLsL.jpg

kiJ6c.jpg

4SBky.jpg

EBpof.jpg

7fLfp.jpg

5uwA4.jpg

XOZeg.jpg

xqa0P.jpg

AhfP8.jpg

u1pDV.jpg

cKT50.jpg

TsEqN.jpg

OzZee.jpg

2aINs.jpg

KZrBd.jpg

WOAs3.jpg

Zs70j.jpg

JM7zO.jpg

GHl9S.jpg

rhEy8.jpg


And yeah don't even think about using the cylinder or piston, they're both in rough shape. I'll be keeping those as souvenirs.
eNdIB.jpg

40wow.jpg

h2aFq.jpg

b5pBB.jpg

VGsFO.jpg


You can reply to this thread, PM, or email me at gnarlywrench at gmail dot com
 
Re: SL125 parts bike - part out

Interested in the carb, ignition switch and coil assembly. Do you have the foot peg bar/side stand that mounts under the engine? Thanks, MBS
 
Re: SL125 parts bike - part out

MBS said:
Interested in the carb, ignition switch and coil assembly. Do you have the foot peg bar/side stand that mounts under the engine? Thanks, MBS

The ignition switch is stuck, the carb is full of mud, and the side stand has the right footpeg broken off.

I'm not sure if the ignition switch can be un-stuck or not. I haven't tried.
The carb I can at least get the mud out of if you want. I have an ultrasonic cleaner if you would prefer me to clean/rebuild the carb.

The coil assembly seems to be in good shape though. Do you want the engine mount or just the capacitor and coil?
 
Re: SL125 parts bike - part out

Well I guess I would be most interested in the coil/capacitor. What are you asking for them? The carb I'm on the fence with. If you clean it I might be interested in that also. Email me on price. wmelliottjr@yahoo.com
 
I pulled the piston from my good CB125 motor.
It was brand new and installed by the PO just before they gave up on it entirely. However the cylinder needed to be bored out so I couldn't use it.

eNQbg.jpg

DjZgF.jpg

WHZxh.jpg

nnTPt.jpg

srCZc.jpg

ewz49.jpg

Tjtto.jpg

sBNs9.jpg


The other c-clip is already installed.
 
Back
Top Bottom