CB350 CL350 extended swingarm / SL350 For Sale

sunnamp33

Been Around the Block
I have 2 SL350 swingarms that are a direct bolt on for CB/CL350s. They are about 1" to 2" longer than a stock cb350 or cl350. A lot of the racing guys do this to get the longer wheel base. PM me if you are interested. $40 OBO shipped to your door. The shipping is included as long as you are in the states and not living in Hawaii or Alaska. Thank you for your time.
 
Don't want to cock block you but have you bolted your SL swingarms to a CB/CL frame? I have and although it does fit into the pivot mounts, the tubes are set wider than the CB/CL swingarm and doesn't clear the 2 rear frame tubes throughout the suspension arc.
 
I have done it. Anytime you put on a longer swing arm you need to get longer shocks. As long as you have longer shocks it clears the frame. This is a very common race mod. As for the tubes being set wider, that is true but a SL axle and spacer takes care of that. I probably should have stated that in my original post. I appreciate you bringing up your concerns.
 
Back
Top Bottom