andrew
Been Around the Block
so i went to install my mini gauges and relocate my ignition switch to the little dash panel i made. i extended the 4 wires from the ignition switch about 5 inches. (wires are: brown w/ white stripe, brown, black, red) all my lights, horn, neutral light, gauge lights and electric starter work but i have no spark now. i took the plugs out (both left and right, one at a time) and held them to the fins and got no spark out of either side. i have no spark what so ever. does the actual entire ignition switch assembly it self have to be grounded or no? i checked every connection and even re-did the 5 wires i extended again just to make sure it wasnt a bad connection and nothing changed. this is killing me. anyone might have an idea of whats goin on? here a few photos of the wires extended as well as the new resting place for the ignition switch.
.