CB350 Sly... Now with 2 finger braking!!!

Re: CB350 Sly... Pod filter? hell yes!

which v-stacks?

6fb004e7.jpg

798607e9.jpg
 
Re: CB350 Sly... Pod filter? hell yes!

so, the motor is in! got the chain on...

fac7234f.jpg


plugging away in the mayehm that is my garage...

e49ba153.jpg
 
Re: CB350 Sly... Which V-stack?

oh hey... i hooked up my tach and clutch yesterday... and both of the cables are way too long because of the clipons being narrower and lower... does anyone know if there are shorter compatible cables out there? like if i got a clutch and tach from a cb175 would they be shorter? or how have any of you clever guys gotten around this... also, i spun up my tach with a drill and it didn't register... does it need power to work? or is it pooched...
 
Re: CB350 Sly... Which V-stack?

First ones will hurt performance. Second type look better and need to go inside filters.
 
Re: CB350 Sly... Which V-stack?

Tach shouldn't be any different to stock, clutch cable gets re-routed over/behind headlight, down right side of frame and crosses to left over carbs.
Brake cable would be the only thing that needs shortening
I would use second stack and it a long round foam filter over it.
Stack would be hidden but performance will be better
 
Re: CB350 Sly... Which V-stack?

thanks for the input guys!
i'll try the rerouting system and see if i can lose the extra length on the cables... im more hopeful about the clutch, my tach is a bit closer than the stock location and the cable is as thick as my arm!
just going for the look on the stacks... i get that neither is optimum for performance!
 
Re: CB350 Sly... Which V-stack?

exhaust mocked up... battery installed... gotta buckle down and start wiring... i have zero electrical skillz!

c5145cf1.jpg
 
Re: CB350 Sly... Which V-stack?

Run tach cable under bottom yoke instead of over it
 
Re: CB350 Sly... Which V-stack?

I agree with the second stack being the better option, but neither is ideal.

The first stack doesn't look to have a well-formed bellmouth, though the full taper is a favorable option. The filter style isn't great, either.

The second is way too short. The first is also too short, but it's better than this one.
 
Re: CB350 Sly... Which V-stack?

Research has shown a parabola is more efficient then the older 3 degree taper.
Intake radius doesn't need to be as big as was previously considered necessary
 
Re: CB350 Sly... Which V-stack?

oil 'filter' thingee.... why is it threaded? what goes in there? I don't seem to have any record of a component going in there...

88a57f5b.jpg
 
Re: CB350 Sly... Oil filter question?

Its threaded so you can put a 6mm bolt in it to remove it
 
Re: CB350 Sly... Oil filter question?

Right on. I had wondered WTF that was for. Just chalked it up to all the other shit I didn't know. lol.

Also gotta say I just read this whole thread for the past 45 minutes and you're doing an awesome job bud. Gave me some ideas for my next build.
 
Re: CB350 Sly... Oil filter question?

nice bike thus far overdraft. Got a 350 im doing myself though it will have multiple incarnations to get up to caliber. Excellent polishing work
 
Back
Top Bottom