Yes, you pretty much nailed it... I got up this morning and read your pre-edit post about the the bypass which was helpful because it eliminated those wires from the equation and then I had the same thought that maybe it was a load issue because I was mixing an incandescent idiot light with all LED turn signals. I tested it with an LED and presto! I still have to sort out how I'm going to cram the LED's into the tach, but that seems doable!crazypj said:The white and yellow are bypass for the light switch/alternator, it's fine and means you get full output all the time
As for indicator idiot light what type of flasher relay are you using and have you fitted LED indicators?
You may have to fit left and right warning lights with LED?
ha nice i know how you feel don't even know how to use all the little settings on my meter.overdraft said:hey, does anyone know how to test one of these bikes to see if it's charging? I have a multimeter but a very small brain... I'm trying to figure out if I've wired this thing up properly...
thanks for any help...
overdraft said:so ya, you can't mix incandescent and LED very well, and the one indicator lamp for both turn signals is no go either, so I built a 2 LED indicator that stuffs up into the hole in the tach
![]()