cb350f 4 into 1 exhaust mount question

T

trsears

New Member
Hi Everyone

New to the forum, and in fact new to motorcycles. Im on my first ever project on my first ever bike so i have a few questions.

First of all thank you already to people on the dotheton forum, you have already been such a help without me even posting anything.

So as you can see the bike has a long way to go, but my next job is to quieten down the ridiculously loud exhaust that the previous owner made. I plan on getting a Mac 4 into 1 exhaust system for now.

The main problem that i can see is that i have no exhaust mounts, I bought what I thought were the correct exhaust/passenger peg mounts from ebay, and it turns out they do not fit at all. I am wondering whether the previous owner cut off the welded on mounts before powder coating. Does anyone know if this is the case?

Also does anyone have any ideas for adding a mount, or know which mount i should get? I have no access to a welder so if there is anything i can use on the current set up that would be great. I have included a picture of the current set up

Thank you so much in advance and sorry if this is in the wrong section of the forum.

<a href="http://imgbox.com/acpWibIF" target="_blank"><img src="http://t.imgbox.com/acpWibIF.jpg" alt="image host"/></a>
<a href="http://imgbox.com/abxCDMOU" target="_blank"><img src="http://t.imgbox.com/abxCDMOU.jpg" alt="image host"/></a>
 
trsears,

Try enlarging the photos, pretty tough to see with them that small. Others have fabbed up hangers, you would just need to find the correct diameter.

http://img.auctiva.com/imgdata/1/1/9/0/9/4/webimg/651024879_tp.jpg
 
Thanks @bbullitt, yeah sorry about the images, this link should show better...http://imgbox.com/abxCDMOU

The image that you sent looks to be just what I am looking for. any idea where I can find ones just like that? The 'Delta Cycle Supply' shop over the image does not have them.

Thanks again
 
Yes, the PO cut off your factory passenger peg/exhaust mounts. The MAC 4:1 mounts about mid way down the muffler which is well behind the rear of your frame where it goes up to meet the subframe, so you're going to have to get creative.
 
Oh and what you're looking for are called P clamps. They can be had lots of places.

http://www.retrocycle.com/CustomChromeSku/11212/Chrome__P_Clamps.html
 
Kanticoy said:
Oh and what you're looking for are called P clamps. They can be had lots of places.

http://www.retrocycle.com/CustomChromeSku/11212/Chrome__P_Clamps.html
Click to expand...

Great @Kanticoy, thanks so much. I had found them on a different site for far more expensive so thanks for the help.

Does anyone know off hand what size the tubing is? 1"? 1 1/4"?
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light

    • Spread the Love

    Back
    Top Bottom