Cb350f fuel lines

[RyanO]

Hey guys,

Just sorting the final bits and pieces of my cb350f project and wondering if you can help le with my fuel lines.

The petcock has two outlets and the PO only has one line going to the carbs in the centre of the 4. Is this correct? Of so I assume that I just put a T/Y joint in there?

Also is there meant to be anything hooked up to these two nipples in the attached photos?

Thanks for you help.

 

[RyanO]

I've just done some further digging through the forum and found that maybe my petcock is not standard?

 

[carnivorous chicken]

I think you're right -- non-standard petcock. My CB350F has a single line out. The petcock may be from a CB550 (mine has two) or other bike. IF it fits on the tank (is it a stock tank?) you could buy a piece to join them before the go to the carb.

 

[RyanO]

Yeah, it's a stock tank and it fits and works :/

I will just run a Y and dual inline filters before the Junction. At least if one clogs ill be alright.

Thanks.