Cb350k4 question

cbracer

New Member
Hello there, I am in a process of building Cb350K4 cafe , I am starting with a bare frame, I would like to find out what other wheels fit cb350? Wheels from cb550 would they fit?

Any help is appreciated.

Thanks in advance
 
Just to clarify, do you mean tires, outer rims, the hub, or the whole wheel assembly?

Welcome to the site!
 
Big R thanks for reply

I realised i should have been more specific. I have CB350K4 forks, my question is will CB550 wheel/Hub/Axle fit at the front?

And same about the back wheel. Let say complete wheels/rims from CB550 or other motorcycles.

What other wheel/rims are straight swap/fit on cb350k4?

Thanks in advance

Gaz :)
 
Somebody will jump in here eventually and KNOW the answer but I'm just kinda guessing. I went to BikeBandit.com and found the axle for a 72 CB350K4, did a search on their page for the part number and it brought up a list of "fits machines".

http://www.bikebandit.com/search-products?q=3865190-001&ch=0&sc=0

Seems like the 350's, 360's, and a 400 will fit, but it didn't list the CB550

But wait for a better answer from somebody else before spending any dough!
 
pretty sure the 550 won't go into the 350 without some work. I have at one point in time had a cb400f cb350t and cb360t in the shop and know the front ends (at least the later 350 models) are swappable, the rear hub looks almost identical and I never measured, but I'd bet my lunch money they can be swapped out.
 
I doubt the rear wheel will work, the axle is probably larger in diameter. I know for sure the CB450 has a larger axle so the 550 would also be too big.
 
550 wheels are 19" front and 18" rear, 40 spoke.
They are significantly heavier than 350 wheel and as mentioned already, have larger axles
I wouldn't use them on 350/360/400 just because I had some laying about (I do have a 550 front)

PJ
 
Back
Top Bottom