CB360 Cafe parts...

JustinLonghorn

JustinLonghorn

No Purple Hearts, No Blue Ribbons
Alright, I have some bits for a CB360 Cafe here.

Battery Box. Pay for shipping, and she's yours.

0827101441-01.jpg


Steering Damper and Fork Clamp. $50 + ship obo.

damper.jpg


Rearsets. Use the stock passenger footpeg location. Includes linkage. $100 + ship.

rearsets.jpg



Tank. Guiness themed. Not perfect paint. Gas tore up the clear coat. Will need sanded, re-shot with 2-K clear. Could use a clean/seal. Includes brand new petcock. $75 obo.

combo.jpg


guiness-2.jpg


combo-2-1.jpg


Tail section. See above pictures. Could also use sand/re-shot with clear. Includes LED tail light, and two single led turn signals. It is a roc city seat. Will need a good upholstered seat (will throw in the cheap shitty white one I have on there). $100 + ship obo.

Here is a bad shot of what the tail light/turn signals look like.

rear.jpg



I will also be selling the entire front end (with new fork seals installed). Front wheel. Headlight (white bucket and lens). Stock exhaust. And various other bits. Let me know if you are interested, and we can work pricing/shipping on these items.
 
Interested in a few items.

The battery box and the legs if they are for disk brakes. Can you also tell me how much shipping would be to Toronto, Ontario - M5R 1K5.

Thanks!
 
will the rearsets and tail work on a 72 350 twin?
i dont know how different if at all the 360 frame is..

if theyll actually work im seriously interested..
 
I am interested in the steering damper as well. I am assuming you already have a buyer for it but could you explain to us how you mounted it to the frame or where? I understand the fork mount but what about the other side?
 
my apologies for the delayed response. I was out of town this weekend.

I will get back to you all through PM's.

As far as the mounting for the steering damper, I used the stock horn mounting points.
 
JustinLonghorn said:
my apologies for the delayed response. I was out of town this weekend.

I will get back to you all through PM's.

As far as the mounting for the steering damper, I used the stock horn mounting points.
Click to expand...

That makes perfect sense - I can't believe I didn't think of that. Thanks-

Let me know if I am still in the running for the setup.

Thanks-
 
I would like the Acewell gauge that isn't listed...... :D

Justin, where are the rearsets from again? I may be interested in "making" them work.
 
rj95lss said:
I still haven't heard if the steering damper is sold or not. I have $50+shipping on it.

Let us know...
Click to expand...

I just got the steering damper in the mail 2 days ago. Just so you don't pass up another deal somewhere else.
 
jmemmert said:
I just got the steering damper in the mail 2 days ago. Just so you don't pass up another deal somewhere else.
Click to expand...

Thanks, I just bid on one on eBay that ends in 2hr. Did you get my wheel/brake setup in the mail by any chance?
 
So,

The Tank/Tail is sold.
The steering damper is sold.
The stock exhaust is sold.
The rearsets are pending.
The front fork legs are pending.
The battery box is pending.

Still have the complete front wheel, with tire (almost brand new). Make me an offer.

I will also sell the triples, the swingarm, the stock rear shocks.

I also have a stock set of carbs (that will probably need rebuilt).

Let me know...
 
Front wheel. Paint is nicked up. Tire is in fantastic shape. Less than 1 season of riding on the tire. $100 + shipping.

front_wheel.jpg


Headlight ears, cut down for a closer fit on the headlight. I dunno, $10 shipped?

headlight_ears.jpg
 
Got the upper triple clamp in today. Man, you got that to me in no time! Thanks again.
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light

    • Spread the Love

    Back
    Top Bottom