CB360 carb sync adapters, tach and speedo plug

Re: CB360 carb sync adapters

I made more adapters but been busy playing with bikes so forgot to post
3 sets for sale.
All starter block off's sold, won't be making more for a while, need to get some bikes finished (plus, haven't fixed bandsaw yet ::) )
 
Made some more speedo/tach plugs if anyone want's them
Motor for band saw is looking expensive (more than saw originally cost) so still no starter plugs
 
Got some more sync adapters available, going to make speedo/tach block off plugs later
 
Got tach/speedo block off plugs made, slightly different shape on head (lower profile)
Tach block off $10.00, plus $2.51 shipping (for one or two)
Postal rates have one up :( again (Jan 2012)
Postage now $2.80, bubble mailer$1.20 but I'll do $13.50 shipped
2 sets of sync adapters left but I bought more material, just in case ;)

Total now $13.50 as paypal takes a cut
 
Got a few tach/speedo plugs made, may even have one spare for my bike this time ;D
 
Plugs are beautiful installed...just got mine installed :0

Quick question (I lost your PM >.>) about the air corrector jets? Which under the diaphragm do I replace? Sorry...I know you told me before...

Will PM you too; thanks again!
 
Replace the #50 air jet, the one at bottom left in this picture I'm not making any more air jets.
This is a picture of pressed in jets
CB360throttlebore.jpg
 
I got a few tach/speedo plugs, vacuum adapters all gone (for now)
Last two sets being mailed out lunchtime tomorrow
PM me

PJ
 
Adapters got in today, already have them put on the bike so I can get it figured out. I should have just gotten them from you, instead of looking else where nothing else fit.

Thanks again, man. Heal up and get back to spinning. :D
 
Just bringing it to top as couple of people haven't seen pics of adapters fitted
I have a couple of speedo/tach plugs left from before I had surgery, couple of people decided they didn't want them after all
 
Whats going on this year?
I guess every Honda twin in North America is going to be running this summer ;D
I have sync adapters ready, couple of starter block offs and tach /speedo plugs.
It's a good job I like being creative with chunks of metal whizzing around ;)
I've never had a hobby come close to break even before 8)
BTW, I no longer make air corrector jets, carbs need some extra stuff done to work better
I'm getting bored with starter block offs, may be a while before I make any after this lot is gone
 
just ordered a set of carb sync adapters. looking forward to seeing how off my carbs really are. Thanks crazypj

Update: got the adapters sooner than expected. Thanks for the excellent adapters pj.
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light

    • Spread the Love

    Back
    Top Bottom