CB360 Hex Screw replacements? A list of 'em perhaps?

[3DogNate]

As I start refurbing my engine and cleaning things up. I'd like to replace all these Phillips head screws with nice hex/Allen cap screws. Has anyone came up with a comprehensive list of must have fastener sizes to order? (Seems like something spreadsheet junkies would complile for a McMaster Carr order...)

 

[Tim]

I did this for my CB550 a few years back - do you have the parts manual for the bike? Lots of online fiche sources that will give you all the bolt sizes for your bike.

For example, for the right-crankcase cover you need 12 M6x40 bolts according to this parts diagram.

http://www.cmsnl.com/honda-cb360-usa_model1007/partslist/E++06.html#results

Won't take you more than 30 minutes to go through the diagrams and jot down the bolt listing - then you can share it in a spreadsheet like I did for my CB550 (I actually put mine into an Access database so I could easily sort and organize all the bolts on the entire bike). I even replaced my light lens bolts with stainless socket cap bolts.

 

[Sonreir]

Here's the kit for all of the engine cases:

http://www.ebay.com/itm/HONDA-CB360-CL360-POLISHED-ENGINE-STAINLESS-BOLT-KIT-/261021982653?pt=Motorcycles_Parts_Accessories&hash=item3cc61f5fbd&vxp=mtr

 

[3DogNate]

Here's the kit for all of the engine cases:

http://www.ebay.com/itm/HONDA-CB360-CL360-POLISHED-ENGINE-STAINLESS-BOLT-KIT-/261021982653?pt=Motorcycles_Parts_Accessories&hash=item3cc61f5fbd&vxp=mtr

oohh... nice... $40 for a serviced stainless set shipped and not having to dig around for them... sold... See, I'm getting great help around here.. Thanks guys...

 

[MotoMadness]

Yup much easier to just fnid a set on ebay haha. Ends up cheaper and you dont waist all your time trying to find the right sizes.

 

[sbaugz]

Just my two cents, but I wouldn't buy the ebay set. I have purchased two different ebay set for two different bikes and all the screws were off and they didn't include all the proper ones. Go to Z1 enterprises. My third go around, I purchased a complete set for my CB360 from Z1 and it was perfect. Everything was there, all pieces were proper size, and it even included all the allen wrenches needed. Cost was $26 plus shipping. Can't be beat.
http://www.z1enterprises.com/Bolt-Set--Honda-CB360-G-T-T76--Stainless-Steel-Set-191-1185.aspx

 

[tv321406]

knew this would come in handy again... not 100% complete but pretty damn close. for a 350