CB450 shift drum star wheel too much wear? (TRANSMISSION)

joevirus563

Coast to Coast
Hi guys,

I need some help with my trany!

I found that the detent wheel have some play in it. (1-2mm) so I'll change that.

Now I'd like to know if my star wheel on the shift drum has to much wear to it.

20131108_073307.jpg

20131108_073249.jpg

20131108_073238.jpg

20131108_073226.jpg
 
I'd say its time to find a new one. You can have that one welded up and reground if you can find someone that can do it.

The wheels are much harder to find and actually prolly faster to rebuild, again if you have someone that has a lathe they can turn a new rivet for it. The wheel inside surface doesn't wear, the rivet does.
 
Can somebody point out to me what's showing wear in this part? Thanks in advance.
 
rich look at the inner most detent rests you will see how deeply grooved they are
 
frogman said:
I'd say its time to find a new one. You can have that one welded up and reground if you can find someone that can do it.

The wheels are much harder to find and actually prolly faster to rebuild, again if you have someone that has a lathe they can turn a new rivet for it. The wheel inside surface doesn't wear, the rivet does.

I found both the wheel NOS and the start wheel NOS as well :) Bought one 25$ each 50$ total for brand new nos part. My cb will shift like a damn new bike now :) no more jumping second gear.
 
it is the star wheel right next to the case
hey joe i may have a good one i do have a good set of gears and shafts pulled them wed ill post some pics later today
 
Re: Re: Parting out complete CB450 Motor



scatman200 said:
Parting our a complete K5 CB450 motor. Feel free to email me at replaymedia05@hotmail.com (My PMs are finicky) with whatever you need, and I'd be happy to pull it off, and send you pics.

Send the pic of the tranny as well. Close up of the dogs might need them.

The shift drum looks OK to me (shift fork) do I need to remove it to check?

Also how the hell do you remove the scew that holds both the star wheel and the drum itself... I'm about to drill them!
 
if the shift forks look ok they will be fine
i have a good set of gears and shafts $45+ shipping pics a little later
 
Thanks guys, this is a weak point for me. I have the kids' book understanding of how a transmission works
 
I've read a dozen of those. I still don't get it, but the guy at the gas station gives me a wide berth
 
Hey Joevirus...was your transmission popping out of 2nd gear? My CB450 intermittently will pop out of 2nd, but only after a downshift. It will shift perfectly from 1-2...but occasionally from 3-2, when I accelerate it will pop out of 2nd. I wonder if my bike has the same issue. Ive been dealing with it, but don't want to tear into it without having a backup bike haha.
 
ARGH!!! I CRACKED MY UPPER CRANK CASE!!!

I was trying to remove the star wheel while blocking the wheel with a screw driver and it craked!!!

:) hopefully I have a copper head gasket.

Now while my other upper case is in order...

How do you remove the damn thing???
 
teddpage said:
Hey Joevirus...was your transmission popping out of 2nd gear? My CB450 intermittently will pop out of 2nd, but only after a downshift. It will shift perfectly from 1-2...but occasionally from 3-2, when I accelerate it will pop out of 2nd. I wonder if my bike has the same issue. Ive been dealing with it, but don't want to tear into it without having a backup bike haha.

Yeah pretty much the same problem.
That wheel need to be in good shape if you want to stay in gear.
 
Back
Top Bottom