cb500 3mm big bore kit new in the box 555kit

bradj

Over 1,000 Posts
DTT BOTM WINNER
i bought this 555 kit when i was building my motor and did not use is it is pistons, rings, wrist pins and circle clips
i have 150 in this and will sell for 80 bucks odo plus shipping
 
Does it have the gasket?

For the record I've used two of these kits on CB550's and found them to be good! The pistons are stamped ART which is the OEM manufacturer of original Honda pistons, so these should be as good as Honda OEM.

These work great on a CB550 rebuild, working out to about 0.5mm overbore I think - basically the 2nd step up in the normal bore.

$80 is a bargain for these 4 pistons, ring sets, wrist pins and circlips, and a downright steal if it has the new headgasket as well. Either way a great deal.
 
no i do not have the gasket i ended up needing a gasket in a pinch so it got robber i was gonna replace it with a 550 gasket but i never got around to ordering it thanks for the info
 
dose this work on a 1973 cb500??????????????????
if so I WANT IT, where are you????????????????

this is minus the head gasket?????????????????
you guys say a 550 one will work?????????????

any way, THIS IS MINE!!!!!
i have to rebuild my 500 engine, this winter and this is pure luck. awsome..
please get back to me,

i will pm you any way,
later.
 
brad just picked up today,
looks great man, thanks again.
need to get a full gasket kit and crank bearings, etc..
can't wait
later.
 
Back
Top Bottom