Helve
Eucalyptus
First time rebuilding the top end on a bike, so I'm not really sure the best way to go about diagnosing my issue (low compression, about 150psi on each side, white smoke from left cyl exhaust). Pulled the heads and found this. ??? ???
Pulled the cylinders and found some light wear marks but no scoring. Cylinder base gasket was covered in oil, assuming it may have been part of the problem.
Pistons seem OK, but I'm not sure if the deposits above the rings are normal. Indication of anything bad? Also, I ordered new rings but I'm not entirely sure if it was a necessary purchase.
Any suggestions as to moves forward from this point? Ordered new gaskets as well, so I'm planning on taking the cylinders to a machine shop to have them inspected but I'm looking for moves to make in the mean time. If you need/want any more details or photos to help me diagnose the issues, let me know.
Pulled the cylinders and found some light wear marks but no scoring. Cylinder base gasket was covered in oil, assuming it may have been part of the problem.
Pistons seem OK, but I'm not sure if the deposits above the rings are normal. Indication of anything bad? Also, I ordered new rings but I'm not entirely sure if it was a necessary purchase.
Any suggestions as to moves forward from this point? Ordered new gaskets as well, so I'm planning on taking the cylinders to a machine shop to have them inspected but I'm looking for moves to make in the mean time. If you need/want any more details or photos to help me diagnose the issues, let me know.